NAMING A STATION
\f desired, you may memorize station call-letters and display them. In
this case, use the call-letter mode.
1. STATION CALL
3. Joc
2. STATION NAME
4. memory
Memorizing with the call-etter mode.
* A maximum of four characters can be memorized.
1. Tune into a desired station, and preset in a STATION CALL button.
© Refer to 'PRESET TUNING" for preset procedure.
© Stations already preset can be recalled with the STATION CALL
buttons.
2. Press the STATION NAME button.
3. Select the desired character with the JOG dial.
e Turning the JOG dial in a clockwise direction changes the
characters in the following order.
Dm
UB am He
NZ
"Ql
4
we
"gr
q
as
.
"—"@"
ee
get
eee
woe
Ee
4. Press the MEMORY button.
5. By repeating steps 3 and 4 up to four characters can be memorized.
© When "COMPLETE"
is displayed, memorization is completed.
© Press MEMORY button within 5 seconds of selecting a character
otherwise the procedure is canceled and the display returns to
TUNER or the previously memorized name.
6. Repeat steps 1 to 5 when naming other stations.
Returning to the TUNER display.
1. Use the JOG MODE button to select '"TUNING''.
2. Change the reception frequency with the JOG dial.
® The station display name will change to ''TUNER".
28
<ARB1332>
Example: To set the name ''ABCD"' into STATION CALL button
CHY.
@ Select CH 9 (Press
once.)
4
When no station name has been previously memorized.
{When a station name has been previously memorized.)
HHAH
@® Press the STATION NAME button.
waives
Flashes
4]
@ Turn the JOG dial until "A" is displayed.
C6
Flashes
Press the MEMORY. button.
When one character is set.
Flashes
"4
Light" -
©® Repeat the operation for the other characters.
Al
A
=)
i}
HAC
HEL.
IG)
AO)
+
ABCD
APL OD
LIC)
¥
If all four characters are not set, the new name will not be memoj zed.
If a name has less than four characters, insert a space ("'*').
If frequencies are not yet stored in STATION CALL buttons, ture ina
station, and then store it in one of the STATION CALL buttons,