Table of Contents
Advertisement
REAR PANEL FACILITIES
©)e
@.@
@@
aes
@) FM/AM ANTENNA terminals
Use these antenna terminals for reception of normal FM and AM
broadcasts.
Attach the accessory AM Loop and FM T-type antennas, here.
¢ For details regarding antenna connection, see the section ''HINTS FOR
BETTER RECEPTION"' on page 47.
@TAPE 2 jacks
Connect a second cassette deck to these jacks.
Connection for Recording
The tape recording jack (TAPE REC) on the cassette deck should be
connected to the REC side of the TAPE 2 jack on the receiver with a
pin plug connecting cord.
Connection for Playback
Connect the TAPE PLAY jack on the cassette deck to the PLAY side
of the TAPE 2 jack on the receiver with a pin plug connecting cord.
@TAPE 1/DAT jacks
Connect a DAT (digital audio tape deck) or your primary analog cassette
deck to these jacks.
Connection for Recording
The tape recording jack (TAPE REC) on the cassette deck or DAT should
be connected to the REC side of the TAPE 1/DAT jack on the receiver
with a pin plug connecting cord.
Audio recording from TAPE 2 is not possible.
Connection for Playback
Connect the TAPE PLAY jack on the cassette deck or DAT to the PLAY
side of the TAPE 1/DAT jack on the receiver with a pin plug connecting
cord.
¢ |ilustration shows U.S. and Canadian models.
AE
porta"
@ VCR 2 jacks
(VIDEO IN]
Connect to the VCR 2 VIDEO OUTPUT jacks.
{AUDIO IN (L, R))
Connect to the VCR 2 AUDIO OUTPUT jacks.
[VIDEO OUT]
Connect to the VCR 2 VIDEO INPUT jacks.
[AUDIO OUT (L, R)]
Connect to the VCR 2 AUDIO INPUT jacks.
®VCR 1 jacks
[VIDEO IN]
Connect to the VCR 1 VIDEO OUTPUT jacks.
{AUDIO IN (L, R)]
Connect to the VCR 1 AUDIO OUTPUT jacks.
[VIDEO OUT}
Connect to the VCR 1 VIDEO INPUT jacks.
[AUDIO OUT (L, R)]
Connect to the VCR 71 AUDIO INPUT jacks.
©S (connector) video jacks
When used in conjunction with a VCR, Video disc player (LaserDisc
player) or TV monitor equipped with S video jacks, correct to these
jacks. See page 7.
@ MULTI-ROOM & SOURCE VIDEO OUT jeck
When using the Multi-Room & Source function, use this i connect the
TV monitor for use in the Sub room.
@® SUB WOOFER OUT jack
If you want to boost the low frequencies, or you want tc use the unit
in a 3D system, connect to a sub woofer power ampliger.
23
<= APB1332 >
Advertisement
Table of Contents
