Table of Contents
Advertisement
DIRECT ACCESS TUNING
DIRECT ACCESS tuning indicator lights up
OIRECT
ACCESS
Press the DIRECT
ACCESS tuning
button.
i
Press *1
I
Press *O
HITS (Hyper Intelligent Tuning System)
—)
y=
+6
eM
a
owacy
7.
Tune
To cancel frequency input
ACCESS tuning button was pressed.
(2 If more than about eight seconds elapse between numbers input.
® Works during FM reception.
(FM)
=a MHz ~~ LSTART
+1 MHz
NOTE:
¢ The system searches for stations within successive 1 MHz ranges
for FM. During DIRECT ACCESS tuning, it searches up and down for
a station until it reaches the edges of the band. If no receivable station
is found within the band range, the receiver returns to the state it was
in before the HITS button was pressed.
© /f the upper (or lower) frequency limit of the receiver is encountered
during HITS operation, the receiver stops searching in that direction
but continues to search in the other.
<ARB1369>
Advertisement
Table of Contents
