Philips V60 Developer's Manual page 10

Field Description
11 PEEP or EPAP setting
12 to 21 Unused
22 Pressure support setting
23 to 29 Unused
30 Measured total
respiratory rate
31 Measured tidal volume
32 Measured total minute
volume
33 Unused
34 Measured peak
inhalation pressure
35 to 37 Unused
38 High inhalation pressure
alarm setting
Table 1-2: SNDA record format (continued)
Example Resolution
0.0◆◆◆ 0.1
◆◆◆◆◆◆ N/A
0◆◆◆◆◆ 1
◆◆◆◆◆◆ N/A
0.0◆◆◆ 0.1 for 1.0
to 9.9
1 for 10 to
90
0.00◆◆ 0.01
0.00◆◆ 0.01 for
0.00 to
9.99
0.1 for 10.0
to 99.9
◆◆◆◆◆◆ N/A
50.0◆◆ 0.1
N/A
◆◆◆◆◆◆
20◆◆◆◆ 1
Range Units Comments
4.0 to 25.0 cmH O CPAP or EPAP
2
setting.
"◆◆◆◆◆◆" in HFT.
In CPAP mode:
EPAP = IPAP = CPAP
N/A N/A Always output as
"◆◆◆◆◆◆"
0 to 36 cmH O IPAP - EPAP in S/T
2
and PCV modes.
0 in CPAP mode.
"◆◆◆◆◆◆" in
AVAPS and PPV
modes, and HFT.
N/A N/A Always output as
"◆◆◆◆◆◆"
0.0 to 9.9 BPM "◆◆◆◆◆◆" in
standby mode or
during exhalation
10 to 90
port leak test.
"◆◆◆◆◆◆" in HFT
0.00 to 3.50 L "◆◆◆◆◆◆" in
standby mode, during
exhalation port leak
test, or for values out
of range.
"◆◆◆◆◆◆" in HFT
0.00 to 9.99 L For values out of
range set output to
99.9◆◆
10.0 to 99.9 "◆◆◆◆◆◆" in
standby mode or
during exhalation
port leak test.
"◆◆◆◆◆◆" in HFT
N/A N/A Always output as
"◆◆◆◆◆◆"
0.0 to 50.0 cmH O "◆◆◆◆◆◆" in
2
standby mode or
during exhalation
port leak test.
"◆◆◆◆◆◆" in HFT
N/A N/A Always output as
"◆◆◆◆◆◆"
5 to 50 cmH O "◆◆◆◆◆◆" in HFT
2
9