FlowLine EchoBeam LR85 Series Quick Start Manual page 13

Screen 1 – Basic Settings
•
Sensor Name
o Input a unique name to identify the device (location, tank
and/or media) within 12 characters.
• Application
o Select the type of media (liquid or solids) that the sensor
will measure.
• Units of Measurement
o Select the desired units of measurement (inches, feet,
millimeters, centimeters or meters) for the sensor.
• Fail-Safe Output
o Select the desired output if the sensor cannot measure a
valid signal return or level (3.8mA, 20.5mA, 21.5mA or Hold
Last Value).
Screen 2 – Set the Sensor Height (4mA)
Input the distance from the bottom of the
tank to the bottom of the sensor, which
defines the 4mA set point.
QS310350 Rev A
13 |