Advertisement
HEADLIGHTS
GETTING TO
KNOW YOUR CAR
LIGHT BEAM DIRECTION
The correct aiming of the headlights is important for
the comfort and safety of not only the driver but
all other road users. This is also covered by a specific
SAFETY
rule of the highway code.
The headlights must be correctly aligned to
guarantee the best visibility conditions for all drivers
STARTING AND
while travelling with headlights on.
DRIVING
Contact a Fiat Dealership to have the lights checked
and adjusted, if necessary.
WARNING LIGHTS
IMPORTANT When the gas discharge (Xenon)
AND MESSAGES
headlamps (for versions/markets, where provided)
are switched on, normally parabolas and light beam
move vertically for about 2 seconds until headlamp
alignment has stabilised.
IN AN EMERGENCY
HEADLIGHT ALIGNMENT CORRECTOR
This device works with the ignition key in the
SERVICING AND
MAR-ON position and the dipped beam headlights
MAINTENANCE
on.
The car will tilt backwards when it is loaded, raising
the light beam. The beams must therefore be
TECHNICAL
realigned in this case.
SPECIFICATIONS
Adjusting headlights alignment
For adjusting, press buttons
INDEX
the dashboard.
88
Press button
position.
Press button
position.
The display shows the position while adjusting.
Correct positions depending on the load
Position 0
Position 1
Position 2
Position 3
IMPORTANT Check the headlight alignment each
time the weight of the load transported changes.
and
fig. 88 on
to increase the light beam of one
to decrease the light beam of one
one or two occupants in the front seats.
five people
five people with a load in the luggage
compartment
driver + maximum permitted load stowed
in the luggage compartment.
fig. 88
F0Q0644
Advertisement
