Advertisement
INCREASING THE STORED SPEED
GETTING TO
This can be done in two ways:
KNOW YOUR CAR
❒ by pressing the accelerator and memorising the
new speed reached;
or
SAFETY
❒ by temporarily turning ring nut B fig. 42 to (+).
Each movement of the ring nut will correspond to a
slight increase in speed (about 1 km/h), while keeping
STARTING AND
the ring nut turned will correspond to a continuous
DRIVING
speed increase.
REDUCING THE STORED SPEED
WARNING LIGHTS
This can be done in two ways:
AND MESSAGES
❒ by switching off the device and then memorising
the new speed;
or
IN AN EMERGENCY
❒ by keeping ring nut B fig. 42 turned to (–) until the
new speed is reached; it will then be memorised
automatically.
SERVICING AND
Each movement of the ring nut will correspond to a
MAINTENANCE
slight reduction in speed (about 1 km/h), while
keeping the ring nut turned will correspond to a
continuous reduction in speed.
TECHNICAL
SPECIFICATIONS
INDEX
60
TURNING THE DEVICE OFF
Turn the ring nut A fig. 42 to OFF or turn the
ignition key to STOP. The device is automatically
turned off in one of the following cases:
❒ when the brake or clutch pedal is pressed;
❒ if the ASR or ESP system cuts in (for versions/
markets, where provided);
❒ if the gear is shifted in versions with Dualogic
gearbox (for versions/markets, where provided) in
Manual mode;
❒ if the Dualogic gearbox lever (where provided) is
inadvertently shifted to N or R.
WARNING
Whilst driving with the device on, never
place the gear lever in neutral and do
not move the Dualogic gearbox lever into
position N or R.
WARNING
If the device is faulty, turn ring nut A
fig. 42 to OFF, check the condition of the
protective fuse and contact a Fiat Dealership.
Advertisement
