Advertisement
HEATED REAR WINDOW AND DOOR
MIRRORS DEMISTING/DEFROSTING
GETTING TO
KNOW YOUR CAR
Press button
function is activated, the button LED
This function is timed and will deactivate
SAFETY
automatically after 20 minutes. Press the button
again to switch the function off in advance.
IMPORTANT Do not apply stickers on the inside of
STARTING AND
the rear window over the heating filaments to avoid
DRIVING
damage.
FAN SPEED ADJUSTMENT
WARNING LIGHTS
To ventilate the passenger compartment properly,
AND MESSAGES
proceed as follows:
❒ fully open the central and side air diffusers;
❒ turn knob A to the blue section;
IN AN EMERGENCY
❒ turn knob C to the required speed;
❒ turn knob E to
❒ turn off internal air recirculation (LED on button
SERVICING AND
off ).
MAINTENANCE
INTERNAL AIR RECIRCULATION
ACTIVATION
TECHNICAL
SPECIFICATIONS
Press button
button LED lights up.
INDEX
44
to activate this function: when this
lights up.
;
: when the function is on, the
It is advisable to switch the internal air recirculation
on while standing in queues or in tunnels to prevent
the introduction of polluted air. However, it is better
not to use the function for long periods, particularly
if there are many people on board, to prevent the
windows from misting.
IMPORTANT Internal air recirculation makes it
possible to reach the required heating or cooling
conditions more quickly depending on the mode
selected. It is not advisable to switch the internal air
recirculation on when it is rainy/cold or the windows
might steam up, especially if the climate control
system is not turned on.
CLIMATE CONTROL SYSTEM (cooling)
Proceed as follows:
❒ turn knob A to the blue section;
❒ turn knob C to the required speed;
❒ turn knob F to
;
❒ press
and
buttons (button LEDs on).
Cooling adjustment
Proceed as follows:
❒ deactivate the
button (LED on button off);
❒ turn knob A rightwards to increase the
temperature;
❒ turn knob C leftwards to reduce the fan speed.
Advertisement
