Advertisement
CHANGING A BULB
GETTING TO KNOW
YOUR CAR
GENERAL INSTRUCTIONS
❒ Before changing a bulb check the contacts for
oxidation;
❒ Burnt bulbs must be replaced by others of the
SAFETY
same type and power;
❒ after replacing a headlight bulb, always check its
alignment;
STARTING AND
❒ when a light is not working, check that the
DRIVING
corresponding fuse is intact before changing a bulb.
For the location of fuses, refer to the paragraph
"If a fuse blows" in this section;
WARNING LIGHTS
AND MESSAGES
Modifications or repairs to the electric
IN AN
system that are not carried out properly
EMERGENCY
or do not take the system technical
specifications into account can cause
malfunctions leading to the risk of fire.
SERVICING AND
MAINTENANCE
TECHNICAL
Halogen bulbs contain pressurised gas,
SPECIFICATIONS
in the case of breakage they may burst.
INDEX
174
WARNING
WARNING
Halogen bulbs must be handled holding
the metallic part only.Touching the
transparent part of the bulb with your
fingers may reduce the intensity of the emitted
light and even reduce the lifespan of the bulb. In
case of accidental contact, wipe the bulb with
a cloth moistened with alcohol and let the bulb
dry.
If possible, we recommend have bulbs
replaced by a Fiat Dealership.The correct
operation and aiming of the outer lights
are absolutely essential for the safety of the car
and of compliance with law.
Due to the high supply voltage, gas
discharge bulbs (Bi-Xenon) (for versions/
markets, where provided) must only be
replaced by a specialist technician: danger of
death! Contact a Fiat Dealership.
IMPORTANT When the weather is cold or damp or
after heavy rain or washing, the surface of headlights
or rear lights, may steam up and/or form drops of
condensation on the inside. This is a natural
phenomenon due to the difference in temperature
and humidity between the inside and the outside
of the glass which does not indicate a fault and does
not compromise the normal operation of lighting
devices. The mist disappears quickly when the lights
are turned on, starting from the centre of the
diffuser, extending progressively towards the edges.
Advertisement
