Advertisement
FIX&GO Automatic KIT
The Fix&Go Automatic kit is located in a special
container in the boot.
The kit includes fig. 132:
❒ a cylinder A containing sealing fluid and fitted with:
filling tube B and adhesive label C with the wording
"max. 80 km/h" to be placed in a position clearly
visible for the driver (e.g. on the dashboard)
after repairing the tyre;
❒ an information leaflet fig. 133, providing
instructions for using the kit correctly. This
booklet should be given to the persons charged
with handling the tyre treated with this kit;
❒ a compressor D including a pressure gauge and
connections, found in the compartment;
❒ a pair of protective gloves located in the side
compartment of the compressor;
❒ adapters for inflating different elements.
fig. 132
Give the booklet to the technicians who
will be handling the tyre that was
treated using the kit.
In the event of a puncture caused by
foreign bodies, the kit may be used to
repair tyres showing damages on the
track or shoulder up to max 4 mm diameter.
Holes and damage on the tyre side walls
cannot be repaired. Do not use the kit
if the tyre was damaged as a result of being
used when underinflated.
fig. 133
F0Q0510
WARNING
WARNING
F0Q0511
GETTING TO KNOW
YOUR CAR
SAFETY
STARTING AND
DRIVING
WARNING LIGHTS
AND MESSAGES
IN AN
EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
169
Advertisement
