Advertisement
Replacing the wiper blades
Proceed as follows:
❒ lift up the windscreen wiper arm and position the
blade so that it forms a 90° angle with the arm;
❒ press tab A fig. 179 of the coupling spring and
remove the blade to be replaced from the arm;
❒ fit the new blade by inserting the tab into the
special slot in the arm. Make sure that the new
blade is secured in position.
fig. 179
Replacing the rear window wiper blade
Proceed as follows:
❒ raise cover A fig. 180 and remove the arm from
the car undoing the nut B that fastens it to the
pivot pin;
❒ correctly position the new arm and tighten the nut
fully;
❒ lower the cover.
fig. 180
F0Q0662
GETTING TO KNOW
YOUR CAR
SAFETY
STARTING AND
DRIVING
WARNING LIGHTS
AND MESSAGES
IN AN EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
F0Q0663
217
Advertisement
