Advertisement
Correct adjustment is obtained when the belt passes
approximately half way between the shoulder and
GETTING TO KNOW
the neck.
YOUR CAR
SAFETY
Make height adjustment of the seat
belts when the car is stationary.
STARTING AND
DRIVING
After adjustment, always check that the
cursor to which the ring is fastened is
WARNING LIGHTS
locked in one of the preset positions.To do this,
AND MESSAGES
with the button A fig. 101 released, exert a
further pressure to allow the anchor device to
catch if release did not take place at one of the
preset positions.
IN AN EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
112
WARNING
WARNING
SBR SYSTEM
This system consists of a buzzer which, in
conjunction with the
warning light flashing on the
instrument panel (initially in fixed mode with
continuous acoustic signal and then in flashing mode
with intermittent acoustic signal), warns the driver
and front passenger that their seat belts have not
been fastened.
For long-term deactivation of the SBR system,
contact a Fiat Dealership. The SBR system can be
reactivated at any time through the Setup Menu only
(see the "Menu Items" paragraph in the "Knowing
your car" chapter).
Advertisement
