Table of Contents
Advertisement
RPN
MSB LSB
Data entry
MSB_
LSB
Description
00H
OOH
= mmH
Pitch bend sensitivity
mm: 00H-18H (0 - 24 semitone)
11: ignored
(Up to 2 octaves, power on default is
two semitones)
00H
O1H
= mmH
IIH
Master fine tuning
mm, | |: OCOH,OOH-40H,00H-7FH,7FH
(-8192*100/8192 - 0 - +8191°100/8192 cent)
00H
02H
mmH
Master coarse tuning
mm: 28H-40H-58H (-24 - 0 - +24 semitone)
| k: ignored
7FH
7FH
RPN reset
Return to no specified parameter of RPN
and NRPN.
Current setting value is no change.
mm] |: ignored
@ Program change
Status
Second
CnH
ppH
n=MIDI channel number :
O=ch.1 15=ch.16
pp=Program number :
OH- FH (0- 15)
00H - 7FH (0-127)
*Recognized when "Rx.Program change = ON(default setting)".
@ Channel pressure
Status
Second
DnH
vwH
n=MIDI channel number :
Q=ch.1 15=ch.16
weValue :
OH- FH (0- 15)
00H - 7FH (0-127)
*Recognized when "Ax.Channel pressure = ON" and set on "controller
function".
@ Pitch bend change
Status
Second
Third
EnH
11H
mmH
n=MIDI channel number:
OH-
FH
(0- 15)
O=ch.1 15=ch.16
mm, |I=Value:
00H,00H - 40H,00H - 7FH,7FH (-8192 - 0 - +8191)
*Recognized when "Rx.Pitch bend change = ON(default setting)" and set
on "controller function(default setting is pitch bend)'.
Channel Mode Message -
@ All sounds off
Status
Second Third
BnH
78H
00H
n=MIDI channel number:
OH-
FH
(0- 15)
O=ch.1 15=ch.16
*When "All sounds off' is received, all sounds of specified channel
turn off immediately. However, the state of channel message is no
change.
= Des,
@ Reset all controllers
Status
Second Third
BnH
79H
00H
n=MIDI channel number:
OH-
FH
(0- 15)
O=ch.1 15=ch.16
"When "reset all controllers" is received, the following controller value
of specified channel return to default at power on.
Controller
Value
Pitch bend change
0(Center)
Polyphonic key pressure
O(off)
Channel pressure
O(off)
Modulation
O(off)
Expression
127(maximum)
Hold1
O(off)
Portamento
O(off)
Sostenuto
O(off)
Soft
O(off}
RPN _ No specified parametres.
NRPN
No specified parametres.
B All notes off
Status
Second
Third
BnH
7BH
00H
n=MIDI channel number:
OH-
FH
(0- 15)
O=ch.1 15=ch.16
*When "All notes off" is received, all on state notes turn to off in the
specified channel. However, sound remains when hold1 and/or
sostenuto is on.
@ OMNI OFF
Status
Second
Third
BnH
7CH
~=O00H
n=MIDI channel number:
OH-
FH
(0- 15)
O=ch.1 15=ch.16
*OMNI OFF is only recognized as "all notes off". Moce cloesn't change.
@ OMNI ON
Status
Second Third
BnH
7DH
= OOH
n=MIDI channel number:
OH-
FH
(0- 15)
O=th.1 15=ch.16
*OMNI ON is only recognized as "all notes off'. Moded@esn't change,
still OMNI OFF.
™ MONO
Status
Second Third
BnH
7EH
mmH
n=MIDI channel number:
OH-
FH
(0- 15)
O=h.1 15=ch.16
mm=number of mono :00H - 10H (0 - 16)
*MONDO is recognized as "all notes off". And the spectiesd channel turns
to Mode4 (m=1), even if mm is not equal to 1 (mm is graored).
m POLY
Status
Second Third
BnH
7FH
00H
n=MIDI channel number:
OH-
FH
(0- 15)
O=h-1 15=ch.16
*POLY is recognized as "all notes off". And the specifsc# channel turns to
Mode3.
Advertisement
Table of Contents
