Roland E-35 Owner's Manual page 72

Soft
Status Second Third
BnH 43H wH
O=ch.1 15=ch.16
0-63=OFF 64-127=ON
n=MIDI channel number :
vwe=Control Value :
OH- FH (0- 15)
00H - 7FH (0-127)
*Recognized when "Rx.Soft = ON(default setting)".
Effect1 depth(Reverb send depth)
Status Second Third
BnH 5BH vwH
n=MIDI channel number :
vw=Reverb send depth :
OH- FH (0- 15) O=ch.1 15=ch.16
00H - 7FH (0-127)
Effect3 depth(Chorus send depth)
Status Second Third
BnH 5DH WH
n=MIDI channel number : O=ch.1 15=ch.16
w=Chorus send depth :
OH- FH (0- 15)
00H - 7FH (0-127)
NRPN MSB/LSB
Status Second Third
BnH 63H mmH
BnH 62H 11H
n —_=MIDI channel number :0H - FH (0- 15)
mm =MSB of the specified parameter by NRPN
Il =LSB of the specified parameter by NRPN
O=ch.1 15=ch.16
"Recognized when "Rx.NRPN = ON(OFF=default setting)".
*"*NRPN**
NRPN (Non Registered Parameter Number) is an expanded message
of the control change. Each function of NRPN is described by
manufacturer.
You can change the value of several GS and E-35 parameters. First, set
NRPN MSB/LSB before send data entry.
E-35 can receive parameters as shown below;
NRPN Data
entry
MSB
Description
MSB LSB
Vibrato rate
relative change on specified channel
mm: OEH-40H-72H (-50 - 0 - +50)
Vibrato depth
relative change on specified channel
mm: OEH-40H-72H (-50 - 0 - +50)
Vibrato delay
relative change on specified channel
mm: OEH-40H-72H (-50 - 0 - +50)
TVF cutoff frequency
relative change on specified channel
mm: OEH-40H-72H (-50 - 0 - +50)
TVF resonance
relative change on specified channel
mm: OEH-40H-72H (-50 - 0 - +50)
TVF&TVA Env. Attack time
relative change on specified channel
mm: OEH-40H-72H (-50 - 0 - +50)
TVF&TVA Env. Decay time
relative change on specified channel
mm: OEH-40H-72H (-50 - 0 - +50)
TVF&TVA Env. Release time
relative change on specified channel
mm: OEH-40H-72H (-50 - 0 - +50)
Pitch coarse of drum instrument
absolute change on specified drum instrument
rr: key number of drum instrument
mm: 00H-40H-7FH (-64 - 0 - +63 semitone)
TVA level of drum instrument
absolute change on specified drum instrument
rr: key number of drum instrument
mm: OOH-7FH (zero - maximum)
Panpot of drum instrument
absolute change on specified drum instrument
rr: key number of drum instrument
mm: 00H,01H-40H-7FH (Random, Left-Center-Right)
Reverb send depth of drum instrument
absolute change on specified drum instrument
rr: key number of drum instrument
mm: 00H-7FH (zero - maximum)
01H 08H mmH
01H 09H
mmH
01H OAH mmH
01H 20H mmH
O1H 21H mmH
01H 63H mmH
O1H 64H mmH
01H 66H mmH
18H rrH mmH
1AH rrH mmH
1CH rrH mmH
1DH rrH mmH
The following part on/off NRPN messages are always received on Basic
Midi channel
4FH 10H mmH = Uppert —— Partonvoff. «— (mm=00H -> Off; mm=7FH -> On)
4FH 11H mmH Lower Part on/off — (mm=00H -> Off; mm=7FH -> On)
4FH 12H mmH M.Bass — Parton/off = (mm=00H -> Off; mm=7FH -> On)
4FH 13H mmH =Upper2 —Parton/off, = (mm=00H -> Off; mm=7FH -> On)
4FH 14H mmH ~ S.Effect Parton/off_ = (mm=00H -> Off; mm=7FH -> On)
4FH 19H mmH M.Drums Parton/off — (mm=00H -> Off; mm=7FH -> On)
4FH 1AH mmH — Acc.Drum Parton/off —(mm=00H -> Off; mm=7FH -> On)
4FH 1BH mmH ~~ Acc.Bass Parton/off (mm=00H -> Off; mm=7FH -> On)
4FH iCH mmH _— Acc.1 Part on/off. (mm=00H -> Off; mm=7FH -> On)
4FH 1DH mmH = Acc.2 Part orvoff = (mm=00H -> Off; mm=7FH -> On)
4FH 1EH mmH Acc.3 Part on/off = (mm=00H -> Off; mm=7FH -> On)
*Data entry LSB is ignored.
RPN MSB/LSB
Status Second Third
BnH 65H mmH
BnH 64H 11H
n =MIDI channel number :0H -FH (0- 15) O=ch.1 15=ch.16
mm =MSB of the specified parameter by RPN
1] =MSB of the specified parameter by RPN
"Recognized when "Rx.RPN = ON(default setting)".
*RPN*
RPN (Registered Parameter Number) is the expand message of control change.
Each function of RPN is described by MIDI.
You can change the value of RPN parameters. First, set RPN MSB/LSB
before send data entry.
E-35 can receive Pitch bend sensitivity(RPN#0), Master fine
tuning(RPN#1), Master coarse tuning(RPN#2) and RPN
reset(RPN#16383).