Table of Contents
Advertisement
Setting
Enhanced LCD
screen scanning
Scan
Consecutive
Read Level
Reset to Default
Barcode
Settings
Data Format
Tap Data Format
set the assigned prefix and suffixes for the barcode.
38
Mesa 4 Rugged Tablet User's Manual
Action
Select Enable enhanced LCD screen
scanning to allow the barcode
module to more easily read a barcode
on an LCD screen.
Determine how many times the
module reads a barcode type before
sending the data to the user. Enter a
number from 1–4.
1—Codabar, MSI, Discrete 2 of 5,
and Interleaved 2 of 5 need two
consecutive reads. All other barcodes
need only one read.
2—All code types must have two
consecutive reads.
3—Codabar, MSI, Discrete 2 of 5,
and Interleaved 2 of 5 needs three
consecutive reads. All other barcodes
only need two reads.
4—All code types must have three
consecutive reads.
Tap Reset Settings to reset the
Barcode Connector utility to the
default settings.
to open the Data Format screen and
Advertisement
Table of Contents
