Focusing Manually - Sony Handycam DCR-VX700 Operation Manual

DÀ ene na
32
Focusing Manually
AUTO LOCK (Automatic Made).
When to Use Manual Focus
In the following cases you should obtain better results bv adjusting the focus manually.
* Insufficient light [a]
* Subjects with little contrast — walls, sky, etc. [b]
* Too much brightness behind the subject [c]
* Horizontal stripes [d]
* Bright subject or subject reflecting light
* Shooting a stationary subject when using a tripod
Focusing Manually
(1) Set FOCUS to MANUAL while the camcorder is recording or in Standby mode.
> appears in the viewfinder.
(2) Keep pressing the "T" (telephoto) side of the zoom button until the zooming stops.
(3) Turn the focus ring to achieve a sharp focus.
(4) Set the desired shot length using the zoom button.
When ,A Or & appears
When ,A appears Focus is at infinity.
When & appears Subject is too close to focus.
Fn pea RAT PN