Replacing A Fuser Unit - Olivetti d-COLOR P3100 Manual

2.2 Replacing consumables
% For information on how to install a Toner Cartridge, refer to page 2-4.
% For information on how to install a Waste Toner Bottle, refer to page 2-15.
% For information on how to install an Imaging Unit, refer to page 2-9.
15
Close the Front Door.
16
Connect the power cable, then turn the power of this machine on.
17
Select [UTILITY] - [ADMIN SETTINGS] - [LIFE] - [REPLACE] - [TRANS. BELT], then reset the counter.
2.2.6

Replacing a Fuser Unit

After the Fuser Unit replacement message has appeared, printing is possible, but the printing quality reduc-
es. Immediately replace it.
1
Turn off the power of this machine.
2
Pull the lever (1), then open the Right Door (2).
% When opening the Right Door, be sure to fold the Manual Feed Tray in advance.
3
Open the Top Door.
d-COLOR P3100
2
2-23