Table of Contents
Advertisement
10. Connecting the power cord
(1) Connect the connector of the power cord to the
main body.
(2) Insert the plug of the power cord into the power
outlet.
11. Starting the machine
Open the power switch cover on the right side of the
main body, and turn ON the main power switch.
12. Date & Time Setting/Time Zone
Setting (Service Mode)
(1) Display the Service Mode screen. (For details
of how to display the Service Mode screen, see
the service manual.)
(2) Display the Date & Time Setting/Time Zone
Setting screen. (To display the Date & Time
Setting/Time Zone Setting screen, press Stop
→ 3 on the control panel.)
(3) Do not input date and time but touch "Entry" of
the Date & Time Setting.
(4) Input the time zone using up/down keys or di-
rect keys.
(5) Touch "Entry" of the Time Zone Setting.
(6) Touch "Apply."
(7) Touch "OK."
(8) Touch "Next."
13. Serial number input
Note:
Serial number input is needed only for the optional
devices that have been or will be installed.
(1) Touch the item you want to enter and input the
serial number.
(2) Touch "END."
(3) For other devices, enter their serial number in
the same way.
(4) Touch "END."
(5) Touch "Next."
14. Unit change
Note:
This function allows the user to select the type of
message that will appear when the replacement
time arrives for each of the different units.
(1) Select the appropriate message type for each
unit.
(2) Touch "Service."
E-8
Advertisement
Table of Contents
