Olivetti d-COLOR P3100 Manual page 67

4.3 Cannot print
Description of problem
A print is faint.
A print is dark.
Image colors run.
The background is dirty.
The degree of gloss is
uneven.
The density is uneven.
d-COLOR P3100
Cause
The laser lens is dirty.
Paper is damp.
Toner is running out in
the Toner Cartridge.
A Toner Cartridge is
damaged.
One or more Imaging
Unit are damaged.
The correct paper type is
not specified.
A Toner Cartridge is
damaged.
One or more Imaging
Unit are damaged.
A Toner Cartridge is
damaged.
One or more Imaging
Unit are damaged.
A Toner Cartridge is
damaged.
Toner is running out in
one or more Toner Car-
tridge, or any Toner Car-
tridge is damaged.
This machine has not
been placed on a level
location.
Remedy
Clean the laser lens.
Remove the damp paper, then replace it with
new dry paper.
Replace the Toner Cartridge.
Remove the Toner Cartridge, then check it for
damage. If the Toner Cartridge is damaged, re-
place it.
Remove Imaging Unit, then check them for
damage. If necessary, replace Imaging Unit.
When printing on thick paper, envelope, label
sheet, postcard, glossy paper, single side only
paper, special paper, or letterhead, specify the
paper type using the printer driver.
Remove the Toner Cartridge, then check it for
damage. If the Toner Cartridge is damaged, re-
place it.
Remove Imaging Unit, then check them for
damage. If necessary, replace Imaging Unit.
Remove the Toner Cartridge, then check it for
damage. If the Toner Cartridge is damaged, re-
place it.
Remove Imaging Unit, then check them for
damage. If necessary, replace Imaging Unit.
Remove the Toner Cartridge, then check it for
damage. If the Toner Cartridge is damaged, re-
place it.
Replace the Toner Cartridge.
Place this machine on a flat, hard, stable, and
horizontal surface (inclination within +/-1 de-
gree).
4
4-7