Table of Contents
Advertisement
Extended Holding Bin
General Market Series
LED TIMERS ( tri-color)
(1 for each pan arrow button)
PRINCE CASTLE
LOGO Button
Remove the unit from the carton and inspect for signs of
1
damage. If there is damage to the unit:
•
notify the carrier within 24 hours of delivery
•
save carton and packaging materials for inspection pur-
poses
•
contact your local dealer, or if purchased directly,
the Prince Castle Sales Department at 800-722-7853
or 1-630-462-8800 to arrange for a replacement unit.
NOTE: Plug the power cord into the proper electrical
receptacle. All electrical connections must be in accordance
with local electrical codes and any other applicable codes.
Place Holding Bin on flat surface.
2
Remove blue and/or white protective covering.
NOTE: When installing this unit, the ambient temperature
at the mounting site should not exceed 100°F (38°C)
Printed in USA 07/2023 © 2023
Product Identification
PAN ARROW Buttons
(Start/Stop Timers)
Installation
PAN LIDS, ONLY used with MOIST products.
DISPLAY
Control Panel
Button Bar
Power
ON/OFF
Switch
UP/DOWN ARROWS
UPPER PAN Display
Plug unit into a grounded
3
receptacle with a matching
plug configuration.
All electrical connections must be in accordance with local
electrical codes and any other applicable codes.
If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent, or similarly qualified persons
in order to avoid a hazard.
To prevent an electric shock hazard this device must be
bonded to equipment in close proximity with an equipotential
bonding conductor. This device is equipped with a grounding
lug for this purpose.
4
(CRISPY products DO NOT require lids)
Enter Button
LOWER PAN Display
WARNING:
540-1730_EN rev.B
Breakfast LED
Regular LED
Advertisement
Table of Contents
