Installing Winmodem Drivers With Windows Nt; With Pnp Enabled - 3Com U.S. Robotics 56K Winmodem Manual

I I I I W W W W
NSTALLING THE NSTALLING THE NSTALLING THE NSTALLING THE
The Setup program should have detected
available resources and entered them. If
you want to use other settings, change
them now.
7.
When this is complete, click OK.
8.
Remove the installation disk from the
disk drive and click Yes to restart the
computer.
You are ready to install communications
software. Refer to the manual of the
communications software for instructions
on installation.
After you install your communications
software, you are ready to use the
Winmodem.
20
® ® ® ®
W W W W 95, 95, 95, W W W W 95,
INMODEM WITH INMODEM WITH INMODEM WITH INMODEM WITH INDOWS INDOWS INDOWS INDOWS
Installing Winmodem Drivers
with Windows NT 4.0

with PNP Enabled

1.
After installing the modem, turn on your
2.
After the Windows NT login, Windows
3.
Select Driver from disk provided by
4.
Insert the installation disk into the disk
5.
Click OK. In the Select Device window
98, 98, 98, 98, W W W W NT 4.0 NT 4.0 NT 4.0 NT 4.0
INDOWS INDOWS INDOWS INDOWS AND AND AND AND INDOWS INDOWS INDOWS INDOWS
Windows NT workstation.
NT will auto-detect your Winmodem
hardware and the " New Hardware
Found" screen appears.
hardware manufacturer and click OK.
drive selected. A:\ should be the default.
your modem's model name should
appear.