3Com U.S. Robotics 56K Winmodem Manual page 12

I I I I W W W W
NSTALLING THE NSTALLING THE NSTALLING THE NSTALLING THE
5.
Select the option Interrupt Requests
(IRQs).
6.
You will see the IRQs your system is
currently using. If IRQs 3, 4, 5, and 7 are
being used, you need to free an IRQ
before you begin installation. This
process involves moving a device from
the IRQ you want to use, to a different
(and usually higher) IRQ setting. To
learn more about moving the device that
is using the IRQ you want to use for
your modem, read the documentation for
that device or contact the manufacturer
of that device.
8
® ® ® ®
W W W W 95, 95, 95, W W W W 95,
INMODEM WITH INMODEM WITH INMODEM WITH INMODEM WITH INDOWS INDOWS INDOWS INDOWS
Windows NT 4.0 Windows NT 4.0
Windows NT 4.0 Windows NT 4.0
1.
Click Start, point to Programs, point to
2.
Click the Resources tab. Then click the
98, 98, 98, 98, W W W W NT 4.0 NT 4.0 NT 4.0 NT 4.0
INDOWS INDOWS INDOWS INDOWS AND AND AND AND INDOWS INDOWS INDOWS INDOWS
Administrative Tools (Common), and
click Windows NT Diagnostics.
IRQ button. The IRQs being used by
your system are listed. If IRQs 3, 4, 5,
and 7 are being used, you need to free an
IRQ before you begin installation. This
process involves moving a device from
the IRQ you want to use, to a different
(and usually higher) IRQ setting. To
learn more about moving the device that
is using the IRQ you want to use for
your modem, read the documentation for
that device or contact the manufacturer
of that device.