Introduction; Overview; Product Features; External Component Description - Dahua DH-PFS3125-24ET-190 User Manual

Overview

The Switch is a high performance multi-mode PoE switch. Provides twenty-four 10/100 Mbps Auto-
Negotiation RJ-45 ports, plus one gigabit Combo ports, it can be used to link bandwidth higher
upstream equipment. These PoE ports can automatically detect and supply power with those IEEE
802.3at compliant Powered Devices (PD) such as AP, IP Cameras or IP Phones, etc. The switch port1 and
port2 can support the 802.3bt standard, and the maximum output power can reach 60W.The switch
on the panel to stir, can be configured to automatically switch the normal working mode, port isolation
(VLAN) mode, monitoring mode, network extend mode, flexible and extensible family, office network
without power line layout restrictions; meet the small and medium-sized enterprises, intelligent
community, hotels, parks and office network network networking and access requirements.

Product Features

Comply with IEEE802.3, IEEE802.3u, IEEE802.3ab, IEEE802.3x, IEEE802.3az, IEEE802.3at,

IEEE802.3af, IEEE802.3bt standards.
24 x 10/100 Mbps Auto Negotiation Ethernet port, 1 x 1000 Mbps Combo ports. All port auto

MDI/MDIX.
The switch 1 and 2 ports support IEEE802.3bt standard 60 W high power output, the total power

consumption of up to 190 W.
Supports IEEE802.3x flow control for Full-duplex and backpressure for Half-duplex.

Supports MAC address auto-learning and auto-aging.

Store and forward mode operates.

Free switching of multiple working modes.

LED indicators for monitoring PSE, Link/Activity.

Built in 210 W high performance switching power supply.


External Component Description

1.3.1 Front Panel

The front panel of the Switch consists of a series of LED indicators, one Mode Switch, 24 x 10/100 Mbps
RJ-45 ports, one Combo (RJ-45/SFP) port.
1

Introduction

1
User's Manual