Table of Contents
Advertisement
1.1 Introduction
The Switch is a layer-2 commercial switch. It has a high-performance switching engine and a large
buffer memory to ensure smooth video stream transmission. With a full-metal and fanless design,
the Switch features great heat dissipation capability on the shell surface, and is able to work in
environments that range from –10 °C (+14 °F) to +55 °C (+131 °F). With its DIP design, it can provide a
variety of working modes for different scenarios. The Switch also supports power consumption
management, which can adapt to the fluctuation of power consumption of terminal device to
ensure stable operation. The Switch is an unmanaged switch, so it does not need to be configured
through web page, which simplifies installation.
The Switch is applicable for use in in a variety of scenarios, such as in the home and office, on server
farms, and in small malls.
1.2 Features
● 4/8 × 100/1000 Mbps Ethernet port.
● Uplink Combo ports include electrical port and optical port.
● All ports support IEEE802.3af and IEEE802.3at. The red port also supports Hi-PoE and IEEE802.3bt.
● 250 m long-distance PoE transmission, which can be enabled by DIP switch.
In Extend Mode, the transmission distance of the PoE port is up to 250 m but the transmission
rate drops to 10 Mbps. The actual transmission distance might vary due to power consumption of
connected devices or the cable type and status.
● PoE watchdog.
● Power consumption management.
● Fanless.
● Supports desktop mount and wall mount.
1 Overview
1
Advertisement
Table of Contents
