Toshiba Disc Creator - Toshiba Equium A110-233 User Manual

■
Write from the computer's hard disc drive to the CD. Do not try to write
from shared devices such as a LAN server or any other network device.
■
Writing with software other than TOSHIBA Disc Creator or InterVideo
WinDVD Creator 2 Platinum has not been confirmed. Therefore,
operation with other software cannot be guaranteed.
When writing or rewriting
Please observe/consider the following when you write or rewrite to a CD-R/
RW, DVD-R/-RW/-RAM or DVD+R/+RW disc.
■
Do not perform any of the following actions when writing or rewriting:
■
■
■
■
■
■
■
■
Do not use shut down/log off and standby/hibernation while writing or
rewriting.
■
Make sure writing or rewriting is completed before going into standby/
hibernation. Writing is completed if you can open the drive tray.
■
Set the computer on a level surface and avoid places subject to
vibration such as airplanes, trains or cars. Do not use an unstable
surface such as a stand.
■
Keep mobile phones and other wireless communication devices away
from the computer.
■
Always copy data from the hard disc drive to the CD. Do not use cut-
and-paste as the original data will be lost if there is a write error.

TOSHIBA Disc Creator

Note the following limitations when you use TOSHIBA Disc Creator:
■
DVD-Video cannot be created using TOSHIBA Disc Creator
■ DVD-Audio cannot be created using TOSHIBA Disc Creator
■
You cannot use the TOSHIBA Disc Creator "Audio CD" function to
record music to the DVD-R/-RW or DVD+R/+RW media.
■
Do not use the "Disc Backup" function of TOSHIBA Disc Creator to
copy DVD-Video and DVD-ROM with copyright protection.
■
DVD-RAM media cannot be backed up with the "Disc Backup" function
of TOSHIBA Disc Creator
■
You cannot back up a CD-ROM or CD-R/RW to DVD-R/-RW or DVD+R/
+RW using the "Disc Backup" function of TOSHIBA Disc Creator.
User's Manual
Change users in the Windows XP operating system.
Operate the computer for any other function, including using a
mouse or TouchPad or closing/opening the LCD panel.
Start a communication application such as a modem.
Apply impact or vibration to the computer.
Install, remove or connect external devices such as PC card, USB
devices, an external display, i.Link devices or optical digital devices.
Use the audio/video control button to reproduce music or voice.
Open the drive.
Operating Basics
4-17