Data Verification
To verify that data has been written or rewritten correctly to a data CD/DVD
you should follow the steps below before you begin the write/rewrite
process:
1. Select Settings for Each Mode → Data Disc in the Setting menu.
2. Display the setting dialog box by one of the following two steps:
3. Mark the Verify written data check box.
4. Select File Open or Full Compare mode.
5. Click the OK button.
How to learn more about TOSHIBA Disc Creator
Please refer to the Help files for additional TOSHIBA Disc Creator
information.
■
When Using Corel DVD MovieFactory
How to make a Labelflash DVD
Simplified steps for making a Labelflash DVD:
1. Insert a Labelflash disc in optical disc drive.
Set PRINTING SIDE for underside.
2. Click Start → All Programs → DVD MovieFactory for TOSHIBA →
3. Click Create Disc Label. Corel Label@Once is started.
4. Click the General tab.
5. Choose Printer as Optical disc drive. e.g.<D:>
6. Add and customize the look of your images and text.
7. Click Labelflash setting and choose Draw Quality.
8. Click Print.
Downloaded from LpManual.com Manuals
User's Manual
■
Click the Recording settings button (
toolbar in the Data Disc mode.
■
Select Setting for Each Mode → Data Disc in the Setting menu.
Opening the TOSHIBA Disc Creator Manual
Start → All Programs → TOSHIBA → CD&DVD Applications → Disc
Creator Help
DVD MovieFactory for TOSHIBA Lancher to launch DVD
MovieFactory.
) for writing on the main
®
for TOSHIBA
Operating Basics
4-13