Installing The Battery Pack - Toshiba Equium A110-233 User Manual

7. Slide the battery pack latch to the left, then pull the battery out of the
battery bay.

Installing the battery pack

To install a battery pack, follow the steps below.
The battery pack is a lithium ion battery, which can explode if not properly
replaced, used, handled or disposed of. Dispose of the battery as required
by local ordinances or regulations. Use only batteries recommended by
TOSHIBA as replacements.
1. Turn the computer's power off.
2. Disconnect all cables connected to the computer.
3. Hold the battery pack so that the label faces down and the connectors
on the battery face the connectors on the computer.
4. Gently slide the battery into the battery bay until the latch clicks into
place.
User's Manual
Removing the battery pack-1
2
Removing the battery pack-2
Power and Power-Up Modes
3
6-11