Working Environment - Toshiba Equium A110-233 User Manual

LCD
Over a period of time, and depending on the usage of the computer, the
brightness of the LCD screen will deteriorate. This is an intrinsic
characteristic of LCD technology. Maximum brightness is only available
when operating in AC power mode. The screen will dim when the computer
is operated on battery power and you may not be able to increase the
brightness of the screen.
CE compliance
This product and the supplied accessories are designed to observe the
related EMC (Electromagnetic Compatibility) and safety standards.
However, TOSHIBA cannot guarantee that this product still observes these
EMC standards if accessories or cables not manufactured / distributed by
TOSHIBA are connected or implemented. To avoid in general EMC
problems, the following advice should be observed:
■
Only CE marked accessories should be connected / implemented
■
Only best shielded cables should be connected

Working environment

This product was designed to fulfil the EMC (Electromagnetic Compatibility)
requirements for "residential, commercial and light industry environments".
The following environment is not approved:
■
Industrial Environments (e.g. environments where a mains voltage of
380V three-phase is being used).
In the following environments the use of this product can be restricted:
■
Medical Environments: This product is not certified as a medical
product according to the Medical Product Directive 93/42/EEC, but can
be used in office areas where the use is not restricted. Please disable
the wireless LAN or Bluetooth hardware in such areas as long this
feature is not official supported by the operator of the related medical
facility.
■
Vehicle Environments: Please read operator's manual of the vehicle
manufacturer for further restrictions of use.
■
Aircraft Environments: Please follow the advices of the flight personnel
regarding restrictions of use.
Any consequences resulting from the use of this product in working
environments that are not approved or the use is restricted are not the
responsibility of Toshiba Corporation. The consequences of the use of this
product in those working environments may be:
■
Interference with other devices or machines in the nearby surrounding
area
■
Malfunction of, or data loss from, this product caused by disturbances
generated by other devices or machines in the nearby surrounding
area.
Furthermore, for general safety reasons, the use of this product in
environments with explosive atmospheres is not permitted.
User's Manual
A110 Series
xii