Page 2
This instruction manual applies to the following models: bistro table counter bistro table high bistro table Diphano cannot be held responsible if the assembly instructions are not followed properly.
Page 3
assembly instructions CONTENT Start by unpacking everything carefully. Make sure to cover the floor to prevent any damage or scratching (you can use the cardboard box for this). 4x bolt (M6x20mm) 4x washer (M6) 1x hex key (4) 3x bolt (M8x30mm) 3x washer (M8) 1x hex key (5) 1x base...
Page 4
CONNECT TABLE TOP SUPPORT Connect the pole (H) to the table top support (I) by fixating the bolt (A) with the washer (B) in the correct order. Repeat this 3 times so you have a bolt at every corner of the pole.
Page 5
CONNECT BASE Connect the base (G) to the other side of the pole (H) by fixating the bolt (D) with the washer (E) in the correct order. Repeat this action 2 times.
Page 6
TURN TABLE Turn the table carefully to its normal position with at least 2 persons.
Page 7
PLACE TABLE TOP Carefully place the table top (J) in the lower part of the support with at least 2 persons.
Page 8
ADJUST FEET Check with a spirit level if the table is placed level. If not, (un)screw the adjustable feet till your table is completely level.
Page 10
maintenance & care POWDERCOATED ALUMINIUM Simply brush away loose dirt, rinse, and clean with a mild, lukewarm soapy solution. Rinse thoroughly and pat dry with a cloth. CERAMIC Simply brush away loose dirt, rinse, and clean with a mild, lukewarm soapy solution or Ceramic cleaner.
Need help?
Do you have a question about the Selecta and is the answer not in the manual?
Questions and answers