Start by unpacking everything carefully. Make sure to cover the floor to prevent any damage or scratching (you can use the cardboard box for this). 1x frame 1x support 4x bolt M6 (60mm) 1x hex key (4mm) Diphano cannot be held responsible if the assembly instructions are not followed properly.
Page 3
POSITION FRAME UPSIDE DOWN Position the shell (A) upside down on the ground. Make sure to cover the ground to prevent any damage or scratching. You can use the cardboard box for this.
Page 4
POSITION SUPPORT Position the support (B) on the shell (A) so the pre-made holes match. Make sure the protruding legs are positioned at the back of the shell.
Page 5
FIXATE SUPPORT Fixate the support (B) onto the shell (A) by screwing the bolts (C) into the pre-made holes (4x).
Page 6
TURN TO ITS NORMAL POSITION Now turn the armchair to its normal position.
maintenance & care POWDERCOATED ALUMINIUM Simply brush away loose dirt, rinse, and clean with a mild, lukewarm soapy solution. Rinse thoroughly and pat dry with a cloth. NATURAL TEAK Simply brush away loose dirt, rinse, and clean with a mild, lukewarm soapy solution.
Need help?
Do you have a question about the Newport and is the answer not in the manual?
Questions and answers