Advertisement
U s e r M a n u a l
CAM-MB13
PRODUCT FEATURES:
Image Sensor: 1/3" CMOS
TV Lines: 700
Resolution: 976 x 592
Minimum Illumination: 0.1 Lux (0 Lux when LED's on)
TV System: NTSC
Infra-red LEDS: Yes (8)
Waterproof Rating: IP68
Viewing Angle: 150 Degrees
Video Output: 1.0V p-p 75ohm
Parking Guidelines: Yes (Removable)
Operating Voltage: 12V DC (Negative Ground)
Operating Temperature: -20 Degrees C to +70 Degrees C
DISCLAIMER:
Prior to Installation
Read the manual prior to installation. Technical knowledge is necessary for installation.
Please ensure you use the correct tools to avoid damage to the vehicle or product.
Connects2 can not be held responsible for the installation of this product.
Technical Support
Connects2 want to provide a fast and suitable resolution should you encounter any
technical issues. With this in mind, when contacting Connects2, try to provide as
much Information as possible. This will speed up the process and help us to help you.
Please use our dedicated online technical support centre: support.connects2.com
www.c2vision-eu.com
High Level Brake Light/Camera
Mercedes Benz Vito 2016 >
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Connects2 CAM-MB13
Summary of Contents for Connects2 CAM-MB13
- Page 1 Connects2 can not be held responsible for the installation of this product. Technical Support Connects2 want to provide a fast and suitable resolution should you encounter any technical issues. With this in mind, when contacting Connects2, try to provide as much Information as possible.
- Page 2 1. Remove the third brake light from the vehicle and unplug the connection cable. 2. Connect the CAM-MB13 to the pre-existing connection cable and refit to the vehicle taking care not to trap any cables. 3. Connect the 4pin of the extension cable to the camera and thread through the vehicle 4.
Need help?
Do you have a question about the CAM-MB13 and is the answer not in the manual?
Questions and answers