Appendix D - Firmware Upgrade Procedure; Figure 37: Determine Ip Address - Novatech Kronos 2 Series User Manual

Appendix D – Firmware Upgrade Procedure
The Kronos firmware can be updated in the field. NovaTech's
download for performing the update.
Login credentials are required for access to the
are available from a orion.support@novatechautomation.com
Do not power-cycle or restart the clock during the update process. Such action will
interrupt the update process and usually requires returning the clock to the factory.
The update process completes with either a "Success" or "Failure" message as
described in this manual. If the update process takes longer than expected, contact
NovaTech Technical Support at (913) 451-1880.
The current Kronos firmware version is displayed as Firmware Version under General on the left side
of the Kronos dashboard. Access the dashboard by entering the IP address of the clock in the web browser
(Figure 38).
If necessary, the IP address can be determined by pressing the knob on the front of the clock. Then the IP
address will be displayed for a few seconds
If the dashboard is password-protected, first a window is displayed for entering the password. Enter your
custom password. In case the password has not been changed from the factory setting, the default
password is novatech. Then the dashboard is displayed.
Support Site (https://support.novatechautomation.com) and
or a
(Figure 37).

Figure 37: Determine IP address

65
Kronos Series 3
Support Site provides the firmware to
NovaTech Sales Representative.