Table of Contents
Advertisement
Kronos Series 3
4 Online Clock Configuration with Web Interface
This section describes the online configuration of the Kronos clock using a web browser.
First, point the browser to the IP address of the clock as shipped or set in section
Initial IP
Address.
By default, the page in
Figure 10
is displayed. If desired, this page can be password protected as described
in sections
Access Passwords (Online)
and
Access Passwords
(Offline). Then the password for status
monitoring must be entered
(Figure
11) to view the page in
Figure
10.
Figure 11: Enter status monitoring password
10, click on Configure on the upper right side to configure the clock. The default
On the page in
Figure
password is novatech which should be changed as soon as possible. The configuration page has a non-
activity timeout of 20 minutes.
Figure 12: Enter configuration password
Then the clock parameters can be configured via the navigation pane on the left side
(Figure
13).
22
Advertisement
Table of Contents
