Web Interface; Table 1: Clock States; Table 2: Satellite Visualization - Novatech Kronos 2 Series User Manual

Clock State Description
Bad time The error estimate is greater than the second user-defined threshold value. The clock
will raise a level 2 error and stop generating time signals. The dot matrix display will
show a corresponding message. The default value for this threshold is 1s. See section
GNSS Settings (Online)
change this to a different value. Normal operation, with time signal generation and
display, is resumed as soon as enough satellites are re-acquired and the error estimate
drops below the user-defined threshold.
3.4

Web Interface

The clock provides a web interface with a dashboard showing all relevant information
read-only page. No sensitive information is displayed. The page can be accessed by pointing a web browser
to the IP address of the clock. The only requirement is that the browser supports HTML5 and Java script.
If desired, access to this page can be password-protected as described in sections
(Online) and Access Passwords
The information in the fields Identifier, Location, and Contact is set in
in General Settings (Offline).
Satellite Color Description
Green Satellite is used for time calculation. The size of the circle indicates the signal strength.
Yellow Satellite is tracked but not used for time calculation.
Gray Satellite is being acquired..
or Out-of-bound Limits (Offline)

Table 1: Clock states

(Offline).

Table 2: Satellite visualization

20
Kronos Series 3
for information about how to
(Figure 10). This is a
Access Passwords
General Settings (Online) or