Table of Contents
Advertisement
The following declarations are identical:
Hello = "this is a long string value"
Hello = this is a long string value
5.1.3 Comments
Lines starting with a hash sign (#) are considered to contain comments and discarded by the clock:
# This is a comment, notice the hash sign
Comments can also be given on value lines using a semicolon. Everything after the semicolon up to the
end of the line is ignored by the clock:
SomeVariable = some_value ; this is also a comment
5.1.4 Blank Lines
Blank lines (i.e. lines containing only blanks or tabs) can be used to visually separate the sections of the
configuration file and increase readability.
5.2
General Settings (Offline)
The parameters in this section of the configuration file defined the identifier, location, and contact strings
for the unit. These strings are shown on the web-based dashboard and reported as sysName, sysLocation,
and sysContact over SNMP. They are also included in all log files. The same settings can be made in the
webpage as described in
General Settings
# IDENTIFIER, LOCATION and CONTACT are shown on the dashboard web page and
# reported as sysName, sysLocation and sysContact when using SNMP
# Replace with values meaningful to the installation
[GENERAL]
IDENTIFIER = Kronos Series 3
LOCATION = Main Street Substation
CONTACT = James Jones 234-456-8901
Parameter
Description
[GENERAL]
General parameters are defined in section [GENERAL].
IDENTIFIER
User-defined identifier for the clock, up to 30 characters long.
Default: Kronos Series 3
LOCATION
User-defined string for the clock location, up to 30 characters long.
CONTACT
User-defined contact string (email or telephone) for the clock, up to 30 characters
long.
(Online).
Table 18: General settings
38
Kronos Series 3
Advertisement
Table of Contents
