Parameter
Time
UTC
Local
POLARITY
5.6
Network Settings (Offline)
This section configures the network parameters for clock's Ethernet ports. The clock has one RJ45 Ethernet
port and four SFP slots.
The same settings can be made in the webpage as described in
# Network parameters
# (see reference manual for further details)
[NETWORK]
IPADDR_A = 10.0.0.150
IPMASK_A = 255.0.0.0
IPADDR_B =
IPMASK_B =
REDUNDANCY_B = NONE
GATEWAY = 10.0.0.2
CHANGEIP = TRUE
Item
IPADDR_A
IPMASK_A
IPADDR_B
IPMASK_B
REDUNDANCY_B
GATEWAY
CHANGEIP
Description
The output can be set to send either UTC time or local time.
Configures the polarity of the signal at OUTPUTn. Valid values are
NORMAL and INVERTED.
Default: NORMAL
Table 21: Output signals
Description
Enter the IP address and netmask for port A.
Enter the IP address and netmask for port B.
NONE
Port B does not use PRP/HSR.
PRP
Port B uses PRP.
HSR
Port B uses HSR.
Enter the IP address of the gateway used by the clock.
TRUE
Enable changing the IP address of port A via the rotary knob.
FALSE
Disable changing the IP address of port A via the rotary knob.
See
Change Using Front Rotary Knob
Table 22: Network settings
42
Kronos Series 3
Network Settings
(Online).
for details.