Syslog (Offline); Table 30: Syslog Settings - Novatech Kronos 2 Series User Manual

5.13 Syslog (Offline)

This section configures the syslog. Syslog can be configured only in the configuration file but not on the
webpage.
# Settings for remote syslog
# Leave TARGET_A or TARGET_B empty if only one remote syslog server is used
[SYSLOG]
ENABLE = TRUE
LEVEL = INFO
TARGET_A = 10.0.0.50
PORT_A = 2514
PROTOCOL_A = TCP
TARGET_B =
PORT_B =
PROTOCOL_B =
Parameter Description
[SYSLOG]
Section name for syslog settings.
ENABLE
TRUE enables syslog.
FALSE disables syslog.
LEVEL
Enter one of the following as the desired level for sending syslog messages. The
higher levels also includes all levels below. For example, if you select crit, then
messages for crit, alert, and emerg are sent.
debug
info
notice
warn
error
crit
alert
emerg
TARGET_A
IP address of the primary syslog server.
PORT_A
Port used by the primary syslog server.
PROTOCOL_A
Protocol used by the primary syslog server. Enter TCP or UDP.
TARGET_B
IP address of the secondary syslog server.
PORT_B
Port used by the secondary syslog server.
PROTOCOL_B
Protocol used by the secondary syslog server. Enter TCP or UDP.
Debug
Informational
Notice
Warning
Error
Critical
Alert
Emergency

Table 30: Syslog settings

49
Kronos Series 3