Snmp Settings (Offline) - Novatech Kronos 2 Series User Manual

5.9

SNMP Settings (Offline)

This section configures the built-in SNMP agent. The same settings can be made in the webpage as
described in SNMP Settings
SNMP can be enabled for each port individually. There are separate configurations for SNMPv1, SNMPv2c,
and SNMPv3 protocol versions. The configurations apply the same to all enabled ports.
The associated MIB (SNMP Management Information Base) file can be downloaded using a web browser
from the device's HTTP dashboard.
# SNMP parameters: there are separate sections for versions 1, 2c and 3.
Uncomment to enable.
[SNMP]
ENABLE_A = TRUE
ENABLE_B = FALSE
[SNMPv1]
RO_COMMUNITY = PRIVATE
[SNMPv2c]
RO_COMMUNITY = PRIVATE
TRAP_COMMUNITY = secret.trap.community
TRAP_HOST1 = 172.16.0.10
TRAP_HOST2 = 172.16.0.20
[SNMPv3]
AUTH_NAME = whatever.you.want
AUTH_KEY = very.secret.password
AUTH_PROTOCOL = SHA
Parameter Description
[SNMP]
Section name for SNMP settings.
ENABLE_A
TRUE enables SNMP for the respective port.
ENABLE_B
FALSE disables SNMP for the respective port.
[SNMPv1]
Section name for SNMPv1 parameters.
RO_COMMUNITY
Read-only community string for SNMPv1.
Default: blank (access is disabled)
[SNMPv2c]
Section name for SNMPv2c parameters.
RO_COMMUNITY
Read-only community string for SNMPv2c.
Default: blank (access is disabled)
TRAP_COMMUNITY
Trap community name for SNMPv2c traps.
TRAP_HOST1
IPv4 trap destination address (or addresses), specified in the form a.b.c.d.
TRAP_HOST2
[SNMPv3]
Section name for SNMPv3 parameters.
(Online).
45
Kronos Series 3