Table of Contents
Advertisement
Item
Enable
Profile
Grandmaster ID
Domain
Priority 1
Priority 2
Layer
Path Delay Mechanism
Announce Interval
Announce Timeout
Sync Interval
Delay Interval
VLAN Enable
VLAN ID
VLAN Priority
4.8
SNMP Settings (Online)
The SNMP settings are configured on the following webpage tab. The same settings can be made offline
as described in
SNMP Settings
In
Figure
23, enable SNMP for all desired ports. The settings in
to all SNMP-enabled ports.
Description
Check the box to enable PTP on this port.
Selecting one of the following profiles sets all options below to default
values. In
Figure
22, values in white can then be further changed. Values
in gray are specified by the profile and cannot be changed. If a profile is
selected all parameters are preset. Custom allows setting any parameter
without restriction by a profile.
Each profile sets default values for each of these parameters. If the
parameter is displayed with white background, the value can be changed.
If the parameter is displayed with gray background, the value cannot be
changed. See
Figure 22
or
supported values.
Table 11: PTP settings
(Offline).
32
Kronos Series 3
PTP Settings (Offline)
for a complete listing of
Figure
24,
Figure
25, and
Figure 26
apply
Advertisement
Table of Contents
