Table of Contents
Advertisement
NLDevice care
Requirements
¡The appliance care is pre-
reid.
→ "Preparing device care", page
39
¡The device care has been called up
pen.
→ "Call up device care", page 39
Pour approx. 1.5 liters of warm tap water
1.
into the condensed water container.
Hold the filled condensed water
container horizontally so that no
liquid escapes.
Slide the condensed water container
2.
into the device until it clicks into
place.
On
to press.
3.
aThe device care starts and there
sounds a signal.
aAfter completion of the device
care, the display shows "End"
and a signal sounds.
Pull out the condensed water
4.
container horizontally and empty
it.
→
"Empty the condensation container",
page 32
Slide the condensed water container
5.
into the device until it clicks into
place.
Put the device in standby mode.
6.
→ "Putting the device to sleep
(standby mode)", page 31
40
16.4 Perform intensive
device care
Carry out the intensive appliance care
to remove stubborn dirt deposits in
the appliance as well as odors after a
standstill period of more than one
month.
Comments
¡The intensive device care
lasts approx. 4 hours and must not
be broken down.
¡For intensive appliance care
you need the original appliance care
product.
→ "Accessories", page 28
WARNING
Risk of injury!
The use of non-original spare parts
and accessories is dangerous.
Only use original spare parts and
▶
original accessories from the
manufacturer.
Start intensive device care
Requirements
¡The appliance care is pre-
reid.
→ "Preparing device care", page
39
¡The device care has been called up
pen.
→ "Call up device care", page 39
.
Press
1.
aThe display shows alternately
"CP2" and the program duration.
NB!An incorrect dosage of fabric
2.
softeners, detergents, care
products and cleaning agents can
affect the operation of the
appliance.
Advertisement
Table of Contents
