Siemens WQ33G2CBDN User Manual And Installation Instructions

Siemens WQ33G2CBDN User Manual And Installation Instructions

Advertisement

Quick Links

Tumble dryer
WQ33G2CBDN
en
User manual and installation instructions
Register your product on My Siemens and discover
exclusive services and offers.
siemens-home.bsh-group.com/welcome
The future moving in.
Siemens Home Appliances

Advertisement

Table of Contents
loading

Summary of Contents for Siemens WQ33G2CBDN

  • Page 1 Tumble dryer WQ33G2CBDN User manual and installation instructions Register your product on My Siemens and discover exclusive services and offers. siemens-home.bsh-group.com/welcome The future moving in. Siemens Home Appliances...
  • Page 2: Table Of Contents

    For further information, please refer to the Digital User Guide. Table of contents 1 Safety ..........   4 9 Programmes .......    26 1.1 General information.... 4 9.1 Automatic programmes.... 26 1.2 Intended use....... 4 9.2 Timed programmes .... 27 1.3 Restriction on user group... 4 10 Accessories......
  • Page 3 16.3 Water tank filter ...... 39 16.4 Moisture sensor...... 39 17 Troubleshooting.......    41 18 Transportation, storage and disposal ........   46 18.1 Preparing the appliance for transportation ...... 46 18.2 Disposing of old appliance .. 46 19 Customer Service.....    47 19.1 Product number (E-Nr.) and production number (FD).. 47 20 Consumption values....
  • Page 4: Safety

    en Safety 1 Safety Observe the following safety instructions. 1.1 General information ¡ Read this instruction manual carefully. ¡ Keep the instruction manual and the product information safe for future reference or for the next owner. ¡ Do not connect the appliance if it has been damaged in transit. 1.2 Intended use Only use this appliance: ¡...
  • Page 5: Safe Installation

    Safety en 1.4 Safe installation Take note of the safety instructions when installing the appliance. WARNING ‒ Risk of electric shock! Improper installation is dangerous. ▶ Connect and operate the appliance only in accordance with the specifications on the rating plate. ▶ Connect the appliance to a power supply with alternating cur- rent only via a properly installed socket with earthing.
  • Page 6 en Safety WARNING ‒ Risk of injury! The high weight of the appliance may result in injury when lifted. ▶ Do not lift the appliance on your own. If this appliance is not correctly installed in a washer-dryer stack, the installed appliance may fall. ▶...
  • Page 7: Safe Use

    Safety en ▶ Wear protective gloves when installing and transporting the ap- pliance. 1.5 Safe use WARNING ‒ Risk of electric shock! If the appliance or the power cord is damaged, this is dangerous. ▶ Never operate a damaged appliance. ▶ Never pull on the power cord to unplug the appliance. Always unplug the appliance at the mains.
  • Page 8 en Safety WARNING ‒ Risk of poisoning! Condensation water from this appliance is not suitable for drinking and may be contaminated with fluff. ▶ Do not drink or reuse the condensation water from the appli- ance. Detergents and care products may result in poisoning if con- sumed.
  • Page 9: Safe Cleaning And Maintenance

    Safety en WARNING ‒ Risk of fire! If drying is interrupted early, the laundry is not cooled sufficiently and may ignite. ▶ Do not interrupt the drying programme early. ▶ If drying is interrupted early, remove the laundry immediately and spread it out. CAUTION ‒ Risk of injury! The covering plate may break if you stand on or climb onto the appliance.
  • Page 10 en Safety WARNING ‒ Risk of injury! The use of non-original spare parts and non-original accessories is dangerous. ▶ Only use the manufacturer's original spare parts and original ac- cessories. WARNING ‒ Risk of poisoning! Poisonous fumes may be given off if you use cleaning agents that contain solvents.
  • Page 11: Preventing Material Damage

    Preventing material damage en Foam and foam rubber may deform Preventing material damage 2 Preventing material or melt during the drying process. Do not dry laundry that contains damage ▶ foam or foam rubber. Unsuitable cleaning products may Follow these instructions to avoid ma- Preventing material damage damage the surfaces of the appli- terial damage and damage to the ap-...
  • Page 12: Energy Saving Mode

    en Installation and connection Spin the laundry in the washing ma- Installation and connection 4 Installation and con- chine before drying. nection a If the laundry is excessively damp, this extends the programme dura- Installation and connection tion and increases energy con- 4.1 Unpacking the appliance sumption.
  • Page 13: Requirements For The Install- Ation Location

    Installation and connection en Replace the accessories in ques- If the appliance is operated immedi- ▶ tion before operating the appli- ately after transportation, the refriger- ance. ant contained in the appliance may → "Accessories", Page 28 result in damage to the appliance. Immediately after transporting the ▶...
  • Page 14: Water Drain Hose

    en Installation and connection Requirements Installation loca- Requirements ¡ The appliance and the accessory tion have been unpacked. Against a wall Do not trap the → "Unpacking the appliance", hoses between Page 12 the wall and the ¡ The appliance is installed at the in- appliance.
  • Page 15 Installation and connection en Push the water drain hose as far Water outlet connection types as it will go into the connecting ATTENTION! piece. In the event of a blocked or covered outlet, accumulated wastewater can flow back into the appliance. Before operating the appliance, en- ▶...
  • Page 16: Aligning The Appliance

    en Installation and connection bow and secure it using fixing ma- terial. Secure the elbow to the gully. 4.5 Aligning the appliance In order to reduce vibrations and noises, align the appliance correctly. To align the appliance, turn the ap- ▶ pliance feet. Check that the appli- ance is level using a spirit level.
  • Page 17: Familiarising Yourself With Your Appliance

    Familiarising yourself with your appliance en Familiarising yourself with your appliance 5 Familiarising yourself with your appliance Familiarising yourself with your appliance 5.1 Appliance You can find an overview of the parts of your appliance here. On certain models, specific details such as the colour and shape may differ from those pictured.
  • Page 18: Control Panel

    en Familiarising yourself with your appliance 5.2 Control panel You can use the control panel to configure all functions of your appliance and to obtain information about the operating status. Programmes → Page 26 Programme selector → Page 29 Display → Page 19 Buttons → Page 22...
  • Page 19: Display

    Display en Display 6 Display The display shows the current set- Display tings, options or relevant information. Example: Display Display Designation Description 0:40 Programme dura- Approximate expected programme dura- tion/programme tion or programme time remaining. time remaining 1:25 Timed programme The timed programme is set. → "Timed programmes", Page 27 8 kg Recommended...
  • Page 20: Dryness Level

    en Display Display Designation Description Dryness level: Iron The dryness level is activated. → "Buttons", Page 23 Dryness level: The dryness level is activated. Cupboard Dry → "Buttons", Page 23 Dryness level: The dryness level is activated. Cupboard Dry → "Buttons", Page 22 Plus Dryness level ad- The adjusted dryness level is activated.
  • Page 21 Display en Display Designation Description Crease-removal Programme status function Pause Programme status End of pro- Programme status gramme Example...
  • Page 22 en Buttons Buttons 7 Buttons Below is an overview of the buttons and their setting options. Buttons Button Selection Description ⁠ Start/Reload ¡ Start Start, cancel or pause the programme. ¡ Cancel ¡ Pause ⁠ 3s ¡ Activate Activate or deactivate the childproof lock.
  • Page 23 Buttons en Button Selection Description ⁠ Cupboard Dry ⁠ Cupboard Dry ¡ Selecting ⁠ Cupboard ¡ Dry activates the dry- ¡ +1 ness level. ¡ +2 The dryness level ¡ +3 defines how damp or dry the laundry is after the programme ends. → "Dryness level", Page 25 ¡...
  • Page 24 en Buttons Button Selection Description ⁠ Ready In ¡ Programme end ¡ Set the programme end. ¡ Programme length The programme dura- tion is already in- cluded in the set num- ber of hours. Once the programme has started, the pro- gramme duration is displayed.
  • Page 25: Changing The Dryness Level

    Dryness level en Dryness level 8 Dryness level Each automatic programme has a specified dryness level. The dryness level Dryness level defines how dry or damp your laundry is after the programme ends. Dryness level Laundry Drying result ⁠ Cupboard Multi-layered, thick laundry The laundry is dry.
  • Page 26: Programmes

    en Programmes Programmes 9 Programmes You can dry your fabrics using either an automatic programme or a timed pro- Programmes gramme. 9.1 Automatic programmes Automatic programmes are pro- Tips grammes in which humidity sensors ¡ Select the dryness level according measure the residual moisture in the to the type of fabric or the desired laundry during the drying cycle.
  • Page 27: Timed Programmes

    Programmes en Programme: Description Max. load (kg) Shirts Dry shirts and blouses made of cotton, linen, synthetics or blended fabrics. Note: For optimal drying results, dry a maximum of 5 shirts at one time. Once the laundry is dry, iron it or hang it up.
  • Page 28 en Accessories Accessories 10 Accessories Use original accessories. These have been made especially for your appliance. Accessories Order number Wool basket Dry or air individual WZ20600 woollen items, sports shoes and soft toys. Y-distributor Connect the water drain 15000490 hose of an additional ap- pliance to the same si- phon outlet.
  • Page 29: Preparing The Laundry

    QR code in the table of scanning the QR code in the table of contents or on www.siemens- contents or on www.siemens- home.bsh-group.com . home.bsh-group.com .
  • Page 30: Starting The Programme

    en Basic operation Remove the laundry. 12.4 Starting the programme Note: If you want to change the time 12.8 Switching off the appli- until the programme ends, set the ance "Ready in" time first. Turn the programme selector to Press ⁠ Start/Reload . ▶ ▶...
  • Page 31 Basic operation en Remove the two-part fluff filter. Open the two fluff filters. Remove the fluff from the recess. Remove the fluff. Ensure that no fluff falls into the air Clean the two fluff filters thoroughly channel. under warm, running water and Disconnect the two-part fluff filter.
  • Page 32: Filter System On The Base Unit

    en Basic operation Close the two fluff filters and put ¡ If you do not clean the appliance them together. as described, the appliance's func- tionality may be impaired. Requirement: The display shows the following during operation: Clean the fluff filter → Page 30. Open the base unit → Page 36.
  • Page 33: Condensation Container

    Basic operation en Clean the filter mat thoroughly un- 12.11 Condensation con- der warm, running water and tainer squeeze it out by hand. Condensation forms during drying, which your appliance uses for auto- matic cleaning. By default, the con- densation is collected in the appli- ance's condensation container.
  • Page 34: Childproof Lock

    en Childproof lock Empty the condensation container. Childproof lock 13 Childproof lock Secure your appliance against being Childproof lock operated unintentionally using the controls. 13.1 Activating the childproof lock Press and hold the two ⁠ 3s but- ▶ tons for approx. 3 seconds. a The display shows a The controls are locked.
  • Page 35: Crease-Removal Function

    Crease-removal function en with a crease-removal function for The results of the crease-removal any laundry that has not been worn function may vary depending on for long. the type of fabric, the amount of laundry and the selected pro- 14.1 Starting a programme gramme.
  • Page 36: Basic Settings

    Note: You can find further information in the digital instruction manual by scanning the QR code in the table of contents or on www.siemens- home.bsh-group.com . 16.1 Tips on cleaning and care Check the water tank filter regu- larly and clean the filter if it is dirty.
  • Page 37 Cleaning and servicing en Open the maintenance flap. Cleaning the base unit You can remove any visible dirt in the base unit. CAUTION Risk of cutting! Touching sharp edges on the heat exchanger may lead to cuts. Do not touch the fins on the heat ▶...
  • Page 38 en Cleaning and servicing Pull the insert out horizontally. Carefully clean the air inlet grille with a vacuum cleaner and brush attachment. Clean the insert under running wa- ter and dry it off. In doing so, ensure that you do not deform or damage the grille.
  • Page 39: Water Tank Filter

    Cleaning and servicing en Closing the base unit 16.3 Water tank filter Requirement: The base unit is open. The filter in the water tank protects → "Opening the base unit", Page 36 the appliance from dirt and contamin- ants. Insert the heat exchanger cover by the handle.
  • Page 40 en Cleaning and servicing ance changes the duration of the automatic programme depending on the residual moisture in the laundry. Cleaning the moisture sensor Over time, residue from limescale, detergents and care products can build up on the moisture sensor. Clean the moisture sensor regularly. ATTENTION! Hard or rough objects may damage the moisture sensor.
  • Page 41: Troubleshooting

    Troubleshooting en Troubleshooting 17 Troubleshooting You can rectify minor faults on your appliance yourself. Read the troubleshoot- Troubleshooting ing information before contacting after-sales service. This will avoid unneces- sary costs. WARNING Risk of electric shock! Incorrect repairs are dangerous. Repairs to the appliance should only be carried out by trained specialist ▶...
  • Page 42 en Troubleshooting Fault Cause and troubleshooting The appliance is not Check whether the lighting in your kitchen or other ▶ working. appliances are working. Appliance paused, but Cooling process active. the drum is rotating. Not a fault – no action required. ▶...
  • Page 43 Troubleshooting en Fault Cause and troubleshooting Condensation in the The appliance uses condensation for the automatic condensation tank self-cleaning. even though the water Not a fault – no action required. ▶ drain hose is connec- Water drain hose is not connected correctly. ted.
  • Page 44 en Troubleshooting Fault Cause and troubleshooting The drying time is too → "Opening the base unit", Page 36. long. Clean the heat exchanger. → "Cleaning the base unit", Page 37 → "Closing the base unit", Page 39. Water is leaking from Appliance is not correctly aligned. the appliance. Aligning the appliance ▶...
  • Page 45 Troubleshooting en Fault Cause and troubleshooting The laundry is too Spread the items of laundry for cooling. damp. Unsuitable dryness level set. → "Changing the dryness level", Page 25. ▶ Drying target not adjusted. → "Adjusting the dryness level", Page 25. ▶ Load too small. Set a timed programme for the subsequent drying.
  • Page 46: Transportation, Storage And Disposal

    en Transportation, storage and disposal Secure the water drain hose on the Transportation, storage and disposal 18 Transportation, stor- appliance against unintentional loosening. age and disposal Ensure that you do not bend the You can find out here how to prepare Transportation, storage and disposal water drain hose.
  • Page 47: Customer Service

    Customer Service en Unplug the appliance from the Detailed information on the warranty mains. period and terms of warranty in your country is available from our after- Cut through the power cord. sales service, your retailer or on our Dispose of the appliance in an en- website.
  • Page 48 en Consumption values Consumption values 20 Consumption values ⁠ Cotton Eco programme (de- The actual values may deviate from Consumption values noted by the arrow symbol) is suit- the indicated values depending on able for drying cotton laundry with a the type of fabric, composition of normal dampness level, and is the laundry to be dried, residual moisture most efficient programme for drying...
  • Page 49: Technical Specifications

    Technical specifications en Programme Final Load Spin Initial Pro- Energy mois- (kg) speed mois- gramm con- ture (rpm) ture e dura- sump- level level tion tion (h:min) (kWh/ cycle) Cotton + ⁠ Iron Dry 12,0 1400 1:14 0,52 Cotton + ⁠ Iron Dry 12,0 1000 2:12...
  • Page 50 en Technical specifications ternatively, you can also find the model identifier in the first line of the EU energy label.
  • Page 52 Valid within Great Britain: Imported to Great Britain by BSH Home Appliances Ltd. Grand Union House Old Wolverton Road Wolverton, Milton Keynes MK12 5PT United Kingdom Manufactured by BSH Hausgeräte GmbH under the trademark licence of Siemens AG *9001621858* 9001621858 (010823)

Table of Contents