Table of Contents
Advertisement
NLDevice care
15.4 Perform intensive
device care
Carry out the intensive appliance care
to remove stubborn dirt deposits in
the appliance as well as odors after a
standstill period of more than one
month.
Comments
¡The intensive appliance care
lasts approx. 4 hours and must not
be broken down.
¡For intensive appliance care
you need the original appliance care
product.
→ "Accessories", page 29
WARNING
Risk of injury!
The use of non-original spare parts
and accessories is dangerous.
Only use original spare parts and
▶
original accessories from the
manufacturer.
Start intensive device care
Requirements
¡The appliance care is pre-
reid.
→ "Preparing device care", page
36
¡The device care has been called up
pen.
→ "Call up device care", page 37
Press .
1.
aThe display shows alternately
"CP2" and the program duration.
NB!An incorrect dosage of fabric
2.
softeners, detergents, care
products and cleaning agents can
affect the operation of the
appliance.
38
Follow the manufacturer's dosing
▶
recommendations.
Place a bottle of appliance care
product and approx. 1.5 liters of
warm tap water in the condensation
container.
Hold the filled condensed water
container horizontally so that no
liquid escapes.
Slide the condensed water container
3.
into the device until it clicks into
place.
OnStart Pauseto press.
4.
aThe device care starts and there
sounds a signal.
aThe device pauses after approx. 3 hours
the appliance care and the
remaining program duration is
shown in the display.
Pull out the condensed water
5.
container horizontally and empty
it.
Pour approx. 1.5 liters of warm tap water
6.
into the condensed water container.
Carefully turn the condensed
7.
water container horizontally and
empty it to rinse out the
appliance care product residues.
Resume intensive device care
Pour approx. 1.5 liters of warm tap water
1.
into the condensed water container.
Hold the filled condensed water
container horizontally so that no
liquid escapes.
Slide the condensed water container
2.
into the device until it clicks into
place.
OnStart Pauseto press.
3.
aDevice care is restarted
barrel.
aAfter completion of the device
care, the display shows "End"
and a signal sounds.
Advertisement
Table of Contents
