Device; Settings; Remote Start; Intelligent Program - Siemens WQ35B2BSFG User Manual And Installation Instructions

On
press to set
▶
to change.
aThe display shows "on" when Wi-Fi is on
activated.
Remark:When Wi-Fi is activated, the
display alternately shows "on" and the
signal strength of the Wi-Fi
connection.
14.5 Deactivate Wi-Fi on the

device

Requirements
¡The Home Connect menu is open
call.
→ "Call up the Home Connect
menu", page 34
¡The display shows "on".
On
press to set
▶
to change.
aThe display shows "oFF" as the Wi-Fi
is deactivated.
14.6 Reset device network

settings

Requirements
¡The Home Connect menu is open
call.
→ "Call up the Home Connect
menu", page 34
¡The display shows "rES" .
Press for at least 3
▶
seconds.
aThe network settings are
reset.

14.7 Remote Start

Enable the appliance for remote start
via the Home Connect app.
Remark
The remote start is performed
under the following conditions for
safety reasons
deactivated:
¡The appliance door opens.
is pressed.
¡
Start Wifi Départ Wifi
printed.
¡After a power cut.
Activate remote start
Requirements
¡The device is connected to your home Wi-Fi
network connected.
¡The device is connected to the
Home Connect app.
¡A program has been selected.
The appliance door is closed.
PressStart Wifi Départ Wifi
▶
a
lights up and the appliance is
enabled for remote start via the
Home Connect app.
Deactivate remote start
PressStart Wifi Départ Wifi
▶
goes out.

14.8 Intelligent program

recommendation

After you have washed your laundry in
the washing machine, the dryer is
recommended a suitable program for
drying the laundry. To determine an
optimal drying program, your
appliances must transmit and receive
information. Note the following:
¡The washing machine must have a machine
ne with the Home Connect
function.
Home ConnectNL
¡
is put in
¡
a
35
.
.