Preparing The Appliance For The Intensive Appliance Care Programme; Running The Intensive Appli- Ance Care Programme - Siemens WQ45G2IADN User Manual And Installation Instructions

Table of Contents

Advertisement

Insert the condensation container
6.
so that it locks into place.
a The appliance care programme
has been completed.
Note: If the condensate water has
been drained from the machine via
the drain hose, please follow the
steps in
→ "Preparing the condensation con-
tainer for the appliance care pro-
gramme", Page 37 in reverse order,
after both the intensive and regular
cleaning processes.
16.5 Preparing the appliance
for the intensive appli-
ance care programme
If the appliance is not used for more
than one month, stubborn dirt or
odours may occur. To remove this,
you can run an intensive appliance
care programme.
Note: The intensive appliance care
programme runs for approximately 4
hours. The programme may take
longer if you do not carry out the ne-
cessary steps in good time while the
programme is running.
Once it has started, the intensive ap-
pliance care programme should not
be cancelled.
Requirements
¡ The appliance is ready to run the
appliance care programme.
→ "Preparing the appliance for the
appliance care programme ",
Page 36.
¡ The appliance care programme
has started.
→ "Starting the appliance care pro-
gramme", Page 37
Press
⁠ .
a "CP2 "  and the programme dura-
tion alternate on the display.
16.6 Running the intensive
appliance care pro-
gramme
Pull out the condensation con-
1.
tainer horizontally and empty it.
Appliance care en
39

Advertisement

Table of Contents
loading

Table of Contents