NLEssentially the Ministry
12.4 Save program settings
You can save your individual program
settings as a favourite.
Requirements
¡A program is set.
→ "Set program", page 29
¡The program settings are
amended.
→ "Adjust program settings", page
29
On for approx. 3 seconds
▶
favouriteto press.
Pressfavouriteto call up the stored
program.
Remark:To overwrite the stored
program, repeat the steps.
12.5 Filling the drum with
laundry
Remark:To avoid creasing, please
observe the maximum load of the
programs.
→ "Programs", page 25
Requirements
¡The laundry is prepared and
sorted.
→ "Laundry", page 29
¡The drum is empty.
Open the door.
1.
Place the laundry in the drum.
2.
Close the door.
3.
Make sure that no small items of
laundry are caught in the door.
30
12.6 Starting the program
Required:A program is set.
→ "Set program", page 29
On
to press.
▶
aThe display shows the program
duration or the program end time.
aAfter program end it shows
display: "End" .
Remark:When "Hot" appears, the
appliance cools down the laundry.
When "Hot" goes out, the laundry
has cooled down.
12.7 Adding laundry
After the program has started, you can
always remove or add the laundry.
On
to press.
1.
The cooling process starts automatically
after approx. 30 seconds and cools the
laundry when the drum is rotating.
If you want to avoid or abort the
cooling process, open the door.
→ "Display", page 20
Open the door.
2.
Add or remove the laundry.
3.
Close the door.
4.
On
to press.
5.
12.8 Program Cancel
On
to press.
1.
Open the door.
2.
Remove the laundry.
3.
→ "Remove laundry",
Page 30
12.9 Taking out laundry
Open the door.
1.