Disposal; Preparing The Device For Transport; Disposal Of Your Old Appliance - Siemens WQ35B2BSFG User Manual And Installation Instructions

Table of Contents

Advertisement

NLTransport, storage and disposal
1 9 Transport, storage
hit and throw
19.1 Preparing the device for
transport
NB!
If the device is used immediately after
transportation, the refrigerant in the
device may cause damage to the
device.
Immediately after transport, allow
the device to rest for two hours
before using it.
Tip:The device may contain residual
water and may drip during transport.
Transport the device upright.
Requirements
¡The condensed water container is
empty. Empty the condensed water
container → Page 32
¡The device is turned on.
→ "Switch on the device",
page 29
Set any program → Page 29 .
1.
Start the program
2.
→ Page 30 and wait 5 minutes.
aThe condensed water has been pumped off.
Put the device in standby mode.
3.
→ "Putting the device to sleep
(standby mode)", page 31
Empty the condensed water container
4.
→ Page 32 .
Slide in the condensed water
5.
container → Page 33 .
Disconnect the plug of the device
6.
from the power supply.
aThe device is ready for trans-
port wine.
48
19.2 Disposal of your old
appliance
Valuable raw materials can be reused
through environmentally friendly

disposal.

WARNING
Risk of health hazard!
Children can lock themselves in the
appliance and endanger their lives.
Do not install the device behind a
door that blocks or prevents the
opening of the device door.
In the case of discarded appliances,
unplug the mains cable, then cut
the mains cable and damage the
appliance door lock to such an
extent that the appliance door no
longer closes.
WARNING
Risk of fire!
The refrigerant R290 in this appliance
is environmentally friendly but
flammable and can catch fire in
improperly disposed appliances.
Dispose of the device properly.
Make sure that the refrigerant
circuit pipes are not damaged.
Unplug the power cord from the wall
1.
outlet.
Cut the power cord.
2.
Dispose of the device in an environmentally friendly
3.
manner.
You can obtain information about the
current disposal methods from your
dealer and your municipal or district
council office.

Advertisement

Table of Contents
loading

Table of Contents