15.2 Change basic settings
PressSettings Preferencesto call up
1.
the basic settings.
Select the desired basic setting.
2.
→ "Overview of basic settings",
page 38
To adjust the basic setting:
3.
Press or to change the
‒
value.
To reset the device to the factory
‒
setting, press for approx. 3
seconds
To save the settings, press Settings
4.
Preferencesto press.
1 6 Device care
H
The appliance offers cleaning pro-
grams, for easy and intensive cleaning
of the device.
16.1 Preparing device care
Prepare the device for device
maintenance
Prepare the device for device care.
Requirements
¡The drum is empty.
¡The device is in standby
stand.
Clean the lint filter.
1.
→ "Clean the fluff filter",
Page 31
to press.
Pull out the condensed water
2.
container horizontally and empty
it.
→
"Empty the condensation container",
page 32
16.2 Call up device care
Required:The device care is
prepared.
→ "Preparing device care", page
39
Press .
1.
The power-on process takes a few
seconds.
PressSettings Preferences .
2.
Set the program to position 5.
3.
aThe display shows alternately
"CP1" and the program duration.
16.3 Carrying out simple device
care
Carry out simple device care to
remove light soiling in the device.
Comments
¡Simple device maintenance
takes approx. 1 hour.
¡The device reminds you after one
longer usage time to perform
simple device care. Before the start
of the program and after the end of
the program, the display shows the
instruction "CArE" . This instruction
reappears until you have completed
basic device care.
Device careNL
39