Related Manuals for Siemens WQ45B2CIDN
Summary of Contents for Siemens WQ45B2CIDN
- Page 1 WQ45B2CIDN Tumble dryer EN User manual and installation instructions Register your appliance on My Siemens and discover exclusive services and offers. Siemens Home Appliances...
-
Page 2: Table Of Contents
Further information and explanations are available online: Table of contents 1 Safety ........... 4 8 Dryness level...... 29 1.1 General information.... 4 8.1 Changing the dryness level.. 29 1.2 Intended use...... 4 8.2 Adjusting the dryness level .. 29 1.3 Restriction on user group.. 4 9 Programmes ...... 30 1.4 Safe installation ...... - Page 3 14 Crease-removal function .. 38 19 Troubleshooting...... 50 14.1 Starting a programme with 20 Transportation, storage and the crease-removal function .. 39 disposal ........ 55 14.2 Filling the water tank ..... 39 20.1 Preparing the appliance for transportation ...... 55 15 Home Connect ...... 40 20.2 Disposing of old appliance ...
-
Page 4: Safety
en Safety 1 Safety Observe the following safety instructions. 1.1 General information Read this instruction manual carefully. ¡ Keep the instruction manual and the product information safe ¡ for future reference or for the next owner. Do not connect the appliance if it has been damaged in transit. ¡... -
Page 5: Safe Installation
Safety en 1.4 Safe installation WARNING ‒ Risk of electric shock! Incorrect installation is dangerous. Connect and operate the appliance only in accordance with the ▶ specifications on the rating plate. Connect the appliance to a power supply with alternating cur- ▶ rent only via a properly installed socket with earthing. The protective conductor system of the domestic electrical in- ▶... - Page 6 en Safety If the power cord is too short and a longer one is not available, ▶ please contact an electrician to have the domestic installation adapted. WARNING ‒ Risk of injury! The high weight of the appliance may result in injury when lifted. Do not lift the appliance on your own.
-
Page 7: Safe Use
Safety en CAUTION ‒ Risk of cutting! Touching sharp edges on the appliance may lead to cuts. Do not touch the sharp edges on the appliance. ▶ Wear protective gloves when installing and transporting the ap- ▶ pliance. 1.5 Safe use WARNING ‒ Risk of electric shock! If the appliance or the power cord is damaged, this is dangerous. - Page 8 en Safety WARNING ‒ Risk of explosion! If there is coal dust or flour in the air around the appliance, this may cause an explosion. Keep the area around the appliance clean during operation. ▶ WARNING ‒ Risk of poisoning! Condensation water from this appliance is not suitable for drinking and may be contaminated with fluff.
-
Page 9: Safe Cleaning And Maintenance
Safety en Rinse the laundry thoroughly with warm water and detergent be- ▶ fore drying it in the machine. Do not use the appliance if industrial chemicals have been used ▶ to clean the laundry beforehand. WARNING ‒ Risk of fire! If drying is interrupted early, the laundry is not cooled sufficiently and may ignite. - Page 10 en Safety An ingress of moisture can cause an electric shock. Do not use steam- or high-pressure cleaners, hoses or sprays ▶ to clean the appliance. WARNING ‒ Risk of injury! The use of non-original spare parts and non-original accessories is dangerous. Only use the manufacturer's original spare parts and original ac- ▶...
-
Page 11: Preventing Material Damage
Preventing material damage en Clean the appliance with nothing ▶ Preventing material damage 2 Preventing material but water and a soft, damp cloth. Remove all detergent residue, damage ▶ spray residue or other residues im- mediately if they come into contact Preventing material damage ATTENTION! with the appliance. -
Page 12: Energy Saving Mode
en Installation and connection → "Disposing of packaging", After drying, clean the fluff filter Page 11 → Page 35. Check the appliance for visible a If the fluff filter is dirty, this reduces damage. the air flow in the appliance, ex- Open the door. tends the programme duration and increases energy consumption. -
Page 13: Requirements For The Install- Ation Location
Installation and connection en Included with Description Installation loca- Requirements the appliance tion Water jug In a washer-dryer Only use the ori- → "Filling the wa- stack ginal connection set from the ter tank", dryer manufac- Page 39 turer when set- ting up this appli- 4.3 Requirements for the in- ance in a stallation location... - Page 14 en Installation and connection container. Use the water outlet hose Pull out the condensation hose to drain away excess condensation from the connecting piece. directly into the waste water system. Notes Operate this appliance using the ¡ water outlet hose provided. → "Connecting the water drain hose", Page 14 If you connect the water outlet...
- Page 15 Installation and connection en Push the water drain hose as far Insert the stopper into the recess as it will go into the connecting in the top. piece. Insert the condensation container Empty the condensation container → Page 38. → Page 37. Connect the appliance to the water outlet.
-
Page 16: Aligning The Appliance
en Installation and connection 4.5 Aligning the appliance Note: You can use the Y-distrib- In order to reduce vibrations and utor → Page 33 noises, align the appliance correctly. to connect the To align the appliance, turn the ap- ▶ water drain hose pliance feet. Check that the appli- of an additional ance is level using a spirit level. - Page 17 Installation and connection en Screw the door hinge and the door Removing the door hook onto the opposite sides. Requirement: The appliance is dis- connected from the mains. Open the door. Unscrew the door. When you do this, ensure that the door seal is not trapped or dam- aged.
- Page 18 en Installation and connection Remove the colour door handle in- Remove the door lock. dicator and swap it with the cover on the opposite side. Insert the door lock on the oppos- ite side. Select the position of the door handle indicator based on the appliance's installation location: –...
-
Page 19: Connecting The Appliance To The Electricity Supply
Installation and connection en Screw on the door. 4.7 Connecting the appliance to the electricity supply Insert the mains plug of the appli- ance's power cable in a socket nearby. The connection details of the appli- ance can be found under Tech- nical data → Page 58. -
Page 20: Familiarising Yourself With Your Appliance
en Familiarising yourself with your appliance Familiarising yourself with your appliance 5 Familiarising yourself with your appliance Familiarising yourself with your appliance 5.1 Appliance You can find an overview of the parts of your appliance here. On certain models, specific details such as the colour and shape may differ from those pictured. -
Page 21: Control Panel
Familiarising yourself with your appliance en 5.2 Control panel You can use the control panel to configure all functions of your appliance and to obtain information about the operating status. Changing a setting value Programmes → Page 30 If you activate certain settings, the Programme selector display shows selection buttons and → Page 34... -
Page 22: Display
en Display Display 6 Display The display shows the current settings, options or relevant information. Display Example: Display Display Description 0:40 Expected programme duration or programme time re- maining in hours and minutes. Recommendation for the maximum load capacity for the selected program in kg. Program end time → "Buttons", Page 27 Save a programme. - Page 23 Display en Display Description Gentle drying is activated for delicate fabrics. → "Buttons", Page 27 Half load is activated. → "Buttons", Page 28 You can remove or add laundry, and interrupt the current programme. → "Adding laundry", Page 35 Empty and insert the condensation container. → "Emptying the condensation container", Page 37 Clean the fluff filter.
-
Page 24: Buttons
en Buttons Buttons 7 Buttons Below is an overview of the buttons and their setting options. Buttons Button Selection Description Start Start, cancel or pause ¡ the programme. Cancel ¡ is displayed, you Pause ¡ can pause the pro- gramme. is displayed, you can start the pro- gramme. -
Page 25: Dryness Level
Buttons en Button Selection Description Favourite Saving Press the button for ap- ¡ prox. 3 seconds to save Setting ¡ your customised pro- gram settings. → "Saving the pro- gramme settings", Page 34 If you briefly press the button, you can set cus- tomised program set- tings for your program. - Page 26 en Buttons Button Selection Description 5 Shirts Activate Adjust the set pro- ¡ gramme with crease-re- Deactivate ¡ moval function smartFin- → "Crease-removal func- tion", Page 38 Suitable for dry shirts and blouses that have only been worn once. Activate for 2 to 5 items of laundry.
- Page 27 Buttons en Button Selection Description 1 Shirt Activate Adjust the set pro- ¡ gramme with crease-re- Deactivate ¡ moval function smartFin- → "Crease-removal func- tion", Page 38 Suitable for dry shirts and blouses that have only been worn once. Activate for one item of laundry.
- Page 28 en Buttons Button Selection Description Half load Activate Dry individual items of ¡ laundry or small loads of Deactivate ¡ laundry. intelligentDry Activate After you have washed your laundry in the wash- ing machine, the dryer recommends a suitable programme for drying the laundry.
-
Page 29: Changing The Dryness Level
Dryness level en Dryness level 8 Dryness level Each automatic programme has a specified dryness level. The dryness level Dryness level defines how dry or damp your laundry is after the programme ends. Dryness level Laundry Drying result Multi-layered, thick laundry The laundry is dry. that does not dry readily. -
Page 30: Programmes
en Programmes Programmes 9 Programmes You can dry your fabrics using either an automatic programme or a timed pro- Programmes gramme. 9.1 Automatic programmes Automatic programmes are pro- Tips grammes in which humidity sensors Select the dryness level according ¡ measure the residual moisture in the to the type of fabric or the desired laundry during the drying cycle. -
Page 31: Timed Programmes
Programmes en Programme Description Max. load (kg) Shirts Suitable for shirts and blouses made of cotton, linen, synthetics or blended fab- rics. Note: For optimal drying results, dry a maximum of 5 shirts or 5 blouses at the same time. Once the laundry is dry, iron it or hang it up. - Page 32 en Programmes Programme Description Max. load (kg) Time Program Warm Dry all types of fabric except for wool and silk. Suitable for pre-dried or slightly damp laundry and for drying off multi-layered, thick laundry. App programs Select additional programmes directly via –...
-
Page 33: Accessories
Accessories en Accessories 10 Accessories Use original accessories. These have Accessories been made especially for your appli- ance. Note: Some accessories are avail- able in other colours. Contact → "Customer Service", Page 56. Order number Connection kit To save space, stack the WZ27510 appliance on a suitable washing machine of the same width and depth and that is from the... -
Page 34: Laundry
en Laundry The switch-on process takes a few Laundry 11 Laundry seconds. Note: The lighting for the drum goes Laundry out automatically. 11.1 Preparing the laundry 12.2 Setting a programme ATTENTION! Objects remaining in the laundry may damage the laundry and the drum. Turn the programme selector and Remove all items from any pock- set the required programme. -
Page 35: Loading Laundry
Basic operation en Press and hold Favourite for ap- The cooling process starts auto- ▶ prox. 3 seconds. matically after approximately 30 seconds and cools down the laun- Press Favourite to call up the dry while the drum is rotating. If saved programme. - Page 36 en Basic operation Disconnect the two-part fluff filter. Requirements The display shows the following ¡ after drying: "End " or the display shows the following ¡ during operation: Open the door. Remove the fluff from the door. Open the two fluff filters. Remove the two-part fluff filter.
-
Page 37: Condensation Container
Basic operation en Clean the two fluff filters thoroughly 12.12 Condensation con- under warm, running water and tainer then dry them off. Condensation that forms in the appli- ance as it dries the laundry is collec- ted by default in the condensation container. -
Page 38: Childproof Lock
en Childproof lock Empty the condensation container. Childproof lock 13 Childproof lock Secure your appliance against being Childproof lock operated unintentionally using the controls. 13.1 Activating the childproof lock Press and hold 3 sec. for ap- ▶ prox. 3 seconds. The display shows The control elements are locked. -
Page 39: Crease-Removal Function
Crease-removal function en with a crease-removal function for The average programme duration any laundry that has not been worn of the crease-removal function is for long. approx. 45 minutes and may be longer or shorter depending on the 14.1 Starting a programme ambient temperature. -
Page 40: Home Connect
en Home Connect Requirements Home Connect 15 Home Connect You have started a programme ¡ with the crease-removal function. This appliance is network-capable. Home Connect → "Starting a programme with the Connecting your appliance to a mo- crease-removal function", Page 39 bile device lets you control its func- The display shows: ¡... -
Page 41: Setting Up Home Connect
Home Connect en The Home Connect app guides 15.4 Activating Wi-Fi on the you through the entire login pro- appliance cess. Requirements 15.2 Setting up Home Con- The Home Connect menu is called ¡ nect → "Calling up the Home Connect Requirements menu", Page 41 The Home Connect app has been ¡ The display shows "oFF". -
Page 42: Remote Start
en Home Connect The washing machine and dryer ¡ 15.7 Remote start must be connected to your home Enable the appliance for remote start network and registered in your via the Home Connect app. Home Connect app. Note Using the intelligent programme Remote start is deactivated for safety recommendation reasons in the following Press intelligentDry . -
Page 43: Data Protection
Home Connect en nect server and if Remote Dia- gnostics is available in the country in which you are using the appliance. Tip: For further information and de- tails about the availability of Remote Diagnostics in your country, please visit the service/support section of your local website: www.home-con- nect.com. -
Page 44: Basic Settings
en Basic settings Basic settings 16 Basic settings You can configure the basic settings for your appliance to meet your needs. Basic settings 16.1 Overview of the basic settings Posi- Basic setting Selection Description tion End signal 0 (off) Set the volume of the signal at the 1 (quiet) end of the programme. -
Page 45: Changing The Basic Set- Tings
Appliance care en Preparing the condensation 16.2 Changing the basic set- container for the appliance care tings programme To call up the basic settings, If you are draining the condensation press Basic Settings . water from the appliance using the drain hose, prepare the condensation Select the required basic setting. -
Page 46: Running The Basic Appli- Ance Care Programme
en Appliance care The switch-on process takes a few The appliance care programme seconds. starts and a signal tone sounds. "End " appears on the display and Press Basic Settings . a signal tone sounds once the ap- Set the programme to position 5. pliance care programme has "CP1"... - Page 47 Appliance care en After around 3 hours, the appli- WARNING ance pauses the appliance care Risk of injury! programme and the remaining pro- The use of non-original spare parts gramme duration flashes on the and non-original accessories is dan- display. gerous. Pull out the condensation con- Only use the manufacturer's ori- ▶...
-
Page 48: Cleaning And Servicing
en Cleaning and servicing Put the appliance into standby Pull out the filter. mode. → "Put the appliance into standby mode", Page 35 Cleaning and servicing 18 Cleaning and servi- cing To keep your appliance working effi- Cleaning and servicing ciently for a long time, it is important to clean and maintain it carefully. -
Page 49: Condensation Container Filter
Cleaning and servicing en Empty the condensation container. ATTENTION! Hard or rough objects may damage → "Emptying the condensation the moisture sensor. container", Page 37 Do not use hard or rough objects, ▶ abrasive cleaning products or steel wool for cleaning. Note: If you do not clean the appli- ance as described, the appliance's functionality may be impaired. -
Page 50: Troubleshooting
en Troubleshooting Troubleshooting 19 Troubleshooting You can rectify minor faults on your appliance yourself. Read the troubleshoot- Troubleshooting ing information before contacting after-sales service. This will avoid unneces- sary costs. WARNING Risk of electric shock! Incorrect repairs are dangerous. Repairs to the appliance should only be carried out by trained specialist ▶... - Page 51 Troubleshooting en Fault Cause and troubleshooting The appliance is not There has been a power cut. working. Check whether the lighting in your room or other ▶ appliances are working. Appliance paused, but Cooling process active. the drum is rotating. Not a fault – no action required. ▶...
- Page 52 en Troubleshooting Fault Cause and troubleshooting and programme Water drain hose is not connected correctly. terminated. Ensure that the water drain hose is connected cor- ▶ rectly. → "Connecting the water drain hose", Page 14 Water drain hose is blocked. Rinse the water drain hose with tap water. ▶...
- Page 53 Troubleshooting en Fault Cause and troubleshooting The drying time is too Insufficient air circulation at the appliance's installation long. location. Ventilate the appliance's installation location. ▶ Insufficient condensation for the automatic self-clean- ing when permanently using the crease-removal func- tion. The appliance's ventilation opening is blocked. Ensure that the ventilation opening of the appliance ▶...
- Page 54 en Troubleshooting Fault Cause and troubleshooting The laundry is too Remove the laundry from the drum as soon as the damp. drying programme has finished. Spread the items of laundry for cooling. Unsuitable dryness level set. → "Changing the dryness level", Page 29. ▶...
-
Page 55: Transportation, Storage And Disposal
Transportation, storage and disposal en Ensure that you do not bend the Transportation, storage and disposal 20 Transportation, stor- water drain hose. age and disposal Empty the condensation container → Page 37. Transportation, storage and disposal Insert the condensation container 20.1 Preparing the appliance → Page 38. for transportation Disconnect the appliance's mains plug from the power supply. -
Page 56: Customer Service
en Customer Service Dispose of the appliance in an en- The contact details for Customer Ser- vironmentally friendly manner. vice can be found in the enclosed Customer Service directory or on our Information about current disposal website. methods are available from your specialist dealer or local authority. -
Page 57: Consumption Values
Consumption values en Consumption values 22 Consumption values The Cotton Eco programme The actual values may deviate from Consumption values (denoted by the arrow symbol) is the indicated values depending on suitable for drying cotton laundry with the type of fabric, composition of a normal dampness level, and is the laundry to be dried, residual moisture most efficient programme for drying... -
Page 58: Technical Data
en Technical data Programme Final Load Spin Initial Pro- Energy mois- (kg) speed mois- gramm con- ture (rpm) ture e dura- sump- level level tion tion (h:min) (kWh/ cycle) Cotton Iron 12.0 1400 2:05 0.96 Cotton Iron 12.0 1400 1:22 0.54 Cotton Iron 12.0... -
Page 59: Declaration Of Conformity
Home Connect functionality is in compliance with relevant statutory requirements. A detailed Declaration of Conformity can be found online at siemens- home.bsh-group.com/uk/ among the additional documents on the product page for your appliance. Only applies to countries in the European Economic Area... - Page 60 en Declaration of Conformity UK (NI) 5 GHz WLAN (Wi-Fi): For indoor use only. 5 GHz WLAN (Wi-Fi): For indoor use only.
- Page 64 EN Manufactured by BSH Hausgeräte GmbH under the trademark licence of Siemens AG Valid within Great Britain: Imported to Great Britain by BSH Home Appliances Ltd. Grand Union House Old Wolverton Road Wolverton, Milton Keynes MK12 5PT United Kingdom BSH Hausgeräte GmbH Carl-Wery-Straße 34...