Table of Contents
Advertisement
en Laundry
Laundry
11 Laundry
Laundry
11.1 Preparing the laundry
ATTENTION!
Objects remaining in the laundry may
damage the laundry and the drum.
Remove all items from any pock-
▶
ets in your laundry before using
the appliance.
Note
The appliance and fabrics are
protected when you prepare your
laundry.
Brush off sand and soil
¡
Sort the laundry according to col-
¡
our and textiles and observe the
care labels
Close all zips, Velcro fasteners,
¡
hooks and eyes
Remove curtain fittings and lead
¡
strips
Load the laundry unfolded into the
¡
drum
Spin the laundry before drying
¡
Basic operation
12 Basic operation
Basic operation
12.1 Switching on the appli-
ance
Note: If you switch the appliance on
the first time after you have connec-
ted it to the electrical system, the
switch-on process takes up to one
minute.
Requirement: The appliance has
been correctly installed and connec-
ted.
→ "Installation and connection",
Page 12
Press
.
▶
32
The switch-on process takes a few
seconds.
Note: The lighting for the drum goes
out automatically.
12.2 Setting a programme
Turn the programme selector and
1.
set the required programme.
→ "Programmes", Page 28
If required, adjust the programme
2.
settings.
→ "Adjusting the programme set-
tings", Page 32
12.3 Adjusting the pro-
gramme settings
Depending on the programme and
programme progress, you can adjust
or activate/deactivate the settings.
Requirement: A programme is set.
→ "Setting a programme", Page 32
Adjust the programme settings.
▶
→ "Buttons", Page 24
Observe the information about op-
erating logic → Page 21.
Note: The programme settings are
not saved permanently for the pro-
gramme.
12.4 Saving the programme
settings
You can save your individual pro-
gramme settings as favourites.
Requirements
A programme is set.
¡
→ "Setting a programme",
Page 32
The programme settings have
¡
been adjusted.
→ "Adjusting the programme set-
tings", Page 32
Advertisement
Table of Contents
