Laundry; Preparing The Laundry; Basic Operation; Switching On The Appliance - Siemens WT47U690CS User Manual And Installation Instructions

Table of Contents

Advertisement

en Laundry
11 Laundry
11.1 Preparing the laundry
ATTENTION!
Objects remaining in the laundry may
damage the laundry and the drum.
Remove all items from any pock-
ets in your laundry before using
the appliance.
To protect your appliance and the
laundry, prepare the laundry be-
forehand.
– Empty any pockets
– Brush sand out of all collars and
pockets
– Close bed covers and cushion
covers
– Close all zips, Velcro fasteners,
hooks and eyes
– Tie cloth belts, apron strings,
etc. together or use a laundry
bag.
– Remove curtain hooks and lead
strips or use a mesh laundry
bag
– Use a mesh laundry bag for
small items of laundry, such as
children's socks
– Separate items of laundry and
shake them out, or observe the
programme description
– Spin the laundry before drying
– Dry woollen items, sports shoes
and soft toys in the wool basket
28
operation
12 Basic operation
operation
12.1 Switching on the appli-
ance
Requirement: The appliance has
been correctly installed and connec-
ted.
→ "Installation and connection",
Page 12
Press
.
The switch-on process takes a few
seconds.
Note: The lighting for the drum goes
out automatically.
12.2 Setting a programme
Turn the programme selector and
1.
set the required programme.
→ "Programmes", Page 25
If required, adjust the programme
2.
settings.
→ "Adjusting the programme set-
tings", Page 28
12.3 Adjusting the pro-
gramme settings
Depending on the programme and
programme progress, you can adjust
or activate/deactivate the settings.
Requirement: A programme is set.
→ "Setting a programme", Page 28
Adjust the programme settings.
→ "Buttons", Page 21
Observe the information about op-
erating logic → Page 18.
Note: The programme settings are
not saved permanently for the pro-
gramme.

Advertisement

Table of Contents
loading

Table of Contents